Telephone
0086-632-5985228
E-mail
china_b@fengerda.com
WhatsApp
0086-18663201128

Stainless Steel Balls For Sale

Our advantages are lessen charges,dynamic income team,specialized QC,sturdy factories,premium quality services for Stainless Steel Balls For Sale, Recycled steel cut wire shot , Fully Angular Steel Grit , Bearing alloy steel grit , Welcome your visiting and any your inquires,sincerely hope we can have chance to cooperate with you and we can build up long well business relationship with you. We will devote ourselves to providing our esteemed customers with the most enthusiastically thoughtful services for Stainless Steel Balls For Sale, Our mission is to deliver consistently superior value to our customers and their clients. This commitment permeates everything we do, driving us to continuously develop and improve our products and the processes to fulfill your needs.


  • Short Lead Time for Best Steel Shot - Grinding Steel Shot – Feng Erda

    Short Lead Time for Best Steel Shot - Grinding Steel Shot – Feng Erda

    Model/Size:0.4-2.5mm Product Detail: Alloy grinding steel shot is based on the high-carbon steel shot,low-carbon steel shot,and low vanadium steel shot,considering the fatal weakness of the above products:air hole,cracks,hardness difference,develop the new products by reaserch the forging technology,it can choose the different material according to the different usage,its cost depends on the application area,can long the usage life,its has high cost performance.steel cut wire shots are availa...
  • High Quality Aluminum Shot - Cast Stainless Steel Shot – Feng Erda

    High Quality Aluminum Shot - Cast Stainless Steel Shot – Feng Erda

    Model/Size:0.03—3.00mm Product Detail: Stainless steel shot is the media type that have become more popular. This products perform similarly to steel shot, however, is made of stainless steel.  It contain a higher concentration of nickel and chromium.  And is good medias to consider when ferrous contamination of the work piece cannot be tolerated.  This products is cast products and is occasionally referred to as Cast Stainless Steel Shot . Using Cast Stainless Steel Shot on smooth and textur...
  • Hot Selling for High Carbon Rounded Steel Shot - Aluminum shot/cut wire shot – Feng Erda

    Hot Selling for High Carbon Rounded Steel Shot - Aluminum shot/cut wire shot – Feng Erda

    Model/Size: 0.6-3.0mm  Product Detail: Aluminum cut-wire shot (Aluminum Shot) is available in mixed aluminum grades (4043, 5053) as well as alloy grades such as type 5356. Our mixed grades yield middle B range (Approximately 40) Rockwell hardness while type 5356 will yield high Rockwell B hardness in the 50 to 70 range. Applications include cleaning aluminum or other non ferrous castings that require a satin type but must also capable of removing parting lines or other blemishes. Product...
  • Hot Selling for High Carbon Rounded Steel Shot - Forging steel  ball – Feng Erda

    Hot Selling for High Carbon Rounded Steel Shot - Forging steel ball – Feng Erda

    Model/Size:30-150mm Product Detail: Forging steel roling  ball is made of round steel as raw material, which is physically processed by new rolling and forging technology and then manufactured by special heat treatment technology. After years of experience accumulation and repeated tests, it is concluded that the most suitable materials for forging rolled steel ball are 45#, 65Mn, 70Mn, B2 (70MnCr) and so on.Of course, some factories also have special needs, our company can customize pro...
  • Best-Selling Estate Steel Shot - Cut Wire Shot/Used Wire – Feng Erda

    Best-Selling Estate Steel Shot - Cut Wire Shot/Used Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: The recycled steel cut wire shot is kind of product which use the recycled material,its material cost is lower,and  difficult to produce high precision products,this kind of product can only be used to clean the cast surface.It’s mainly uesd in the public areas.For customers who do not have special requirements on the surface of the workpiece, we strongly recommend you to use the old wire cut shot, save the cost, and more abrasion resistant than casting...
  • 18 Years Factory Steel pellets - High Carbon Angular Steel Grit – Feng Erda

    18 Years Factory Steel pellets - High Carbon Angular Steel Grit – Feng Erda

    Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: High carbon angular steel grit is manufactured from high carbon steel shot. Steel shots that are crushed  to granular grit form and subsequently tempered  to three different hardnesses (GH, GL and GP) to cater for different applications. High carbon steel grit is widely used as a media for de- scaling steel components prior to coating. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION   0.8-1.2% P ≤0...
  • Factory Supply Bearing Steel Grit G25 - Cast Stainless Steel Shot – Feng Erda

    Factory Supply Bearing Steel Grit G25 - Cast Stainless Steel Shot – Feng Erda

    Model/Size:0.03—3.00mm Product Detail: Stainless steel shot is the media type that have become more popular. This products perform similarly to steel shot, however, is made of stainless steel.  It contain a higher concentration of nickel and chromium.  And is good medias to consider when ferrous contamination of the work piece cannot be tolerated.  This products is cast products and is occasionally referred to as Cast Stainless Steel Shot . Using Cast Stainless Steel Shot on smooth and textur...
  • Professional China S390 - High Carbon Angular Steel Grit – Feng Erda

    Professional China S390 - High Carbon Angular Steel Grit – Feng Erda

    Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: High carbon angular steel grit is manufactured from high carbon steel shot. Steel shots that are crushed  to granular grit form and subsequently tempered  to three different hardnesses (GH, GL and GP) to cater for different applications. High carbon steel grit is widely used as a media for de- scaling steel components prior to coating. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION   0.8-1.2% P ≤0...
  • Factory Cheap Hot surface treatment - Red Copper shot/copper cut wire shot – Feng Erda

    Factory Cheap Hot surface treatment - Red Copper shot/copper cut wire shot – Feng Erda

    Model/Size: 0.6-3.0mm  Product Detail: 1. Removes flash up to 0.20″ from die castings without damaging the surface Reduces wear and tear on blast equipment Removes paint and other coatings without damaging the surface of the part Thin film of zinc is deposited on steel parts during cycle providing short-term rust protection Most suitable abrasive for deflashing magnesium die castings Best choice for die castings with fine detail or delicate areas. 2. The red copper cut wire shot as...
  • Hot sale Steel Shot - Cast Stainless Steel Shot – Feng Erda

    Hot sale Steel Shot - Cast Stainless Steel Shot – Feng Erda

    Model/Size:0.03—3.00mm Product Detail: Stainless steel shot is the media type that have become more popular. This products perform similarly to steel shot, however, is made of stainless steel.  It contain a higher concentration of nickel and chromium.  And is good medias to consider when ferrous contamination of the work piece cannot be tolerated.  This products is cast products and is occasionally referred to as Cast Stainless Steel Shot . Using Cast Stainless Steel Shot on smooth and textur...
  • Factory Outlets Rolling Ball - Aluminum shot/cut wire shot – Feng Erda

    Factory Outlets Rolling Ball - Aluminum shot/cut wire shot – Feng Erda

    Model/Size: 0.6-3.0mm  Product Detail: Aluminum cut-wire shot (Aluminum Shot) is available in mixed aluminum grades (4043, 5053) as well as alloy grades such as type 5356. Our mixed grades yield middle B range (Approximately 40) Rockwell hardness while type 5356 will yield high Rockwell B hardness in the 50 to 70 range. Applications include cleaning aluminum or other non ferrous castings that require a satin type but must also capable of removing parting lines or other blemishes. Product...
  • China New Product Stainless Steel Shot Blasting - Stainless Steel Cut Wire Shot – Feng Erda

    China New Product Stainless Steel Shot Blasting - Stainless Steel Cut Wire Shot – Feng Erda

    Model/Size:0.2-2.5mm Product Detail: Stainless steel cut wire shot is our particular specialty.It is made of SUS200, 300, 400 series stainless steel wire cut into segments. Stainless steel cut wire shot is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non-ferrous work objects could be harmful. It is also used in peening these metals (stainless steel, titanium, brass or aluminum) in work object...
  • Original Factory Steel Abrasives - Low Carbon Rounded Steel Shot – Feng Erda

    Original Factory Steel Abrasives - Low Carbon Rounded Steel Shot – Feng Erda

    Model/Size:S110-S930/Φ0.3mm-2.8mm Product Detail: Low carbon steel shots contain less carbon, phosphorus and sulfur than high carbon steel shots. Therefore, the internal micro structure of low carbon shots are much smoother. Low carbon steel shots are softer compared to high carbon steel shots too. This results in 20 – 40 % longer abrasive life time. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982...
  • Fast delivery HYBRID SHOT - Aluminum shot/cut wire shot – Feng Erda

    Fast delivery HYBRID SHOT - Aluminum shot/cut wire shot – Feng Erda

    Model/Size: 0.6-3.0mm  Product Detail: Aluminum cut-wire shot (Aluminum Shot) is available in mixed aluminum grades (4043, 5053) as well as alloy grades such as type 5356. Our mixed grades yield middle B range (Approximately 40) Rockwell hardness while type 5356 will yield high Rockwell B hardness in the 50 to 70 range. Applications include cleaning aluminum or other non ferrous castings that require a satin type but must also capable of removing parting lines or other blemishes. Product...
  • Cheap price Stainless Steel Grit - Low Carbon Rounded Steel Shot – Feng Erda

    Cheap price Stainless Steel Grit - Low Carbon Rounded Steel Shot – Feng Erda

    Model/Size:S110-S930/Φ0.3mm-2.8mm Product Detail: Low carbon steel shots contain less carbon, phosphorus and sulfur than high carbon steel shots. Therefore, the internal micro structure of low carbon shots are much smoother. Low carbon steel shots are softer compared to high carbon steel shots too. This results in 20 – 40 % longer abrasive life time. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982...
  • Factory making Steel Shot Grit - Zinc shot/Zinc cut wire shot – Feng Erda

    Factory making Steel Shot Grit - Zinc shot/Zinc cut wire shot – Feng Erda

    Model/Size:0.6-2.5mm Product Detail: We offer a qualitative range of Zinc Cut Wire Shots. Available at competent rates, our products reduce wear and tear on blast equipment. These Zinc cut wire shots are softer than stainless steel cut wire or cast products. Zinc cut wire shot is available in different sizes. Zinc Cut Wire Shot is produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is used mainly for sand removal, deburring and deflashi...
  • 2020 New Style G30 Steel Grit - Cut Wire Shot/Used Wire – Feng Erda

    2020 New Style G30 Steel Grit - Cut Wire Shot/Used Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: The recycled steel cut wire shot is kind of product which use the recycled material,its material cost is lower,and  difficult to produce high precision products,this kind of product can only be used to clean the cast surface.It’s mainly uesd in the public areas.For customers who do not have special requirements on the surface of the workpiece, we strongly recommend you to use the old wire cut shot, save the cost, and more abrasion resistant than casting...
  • New Fashion Design for S550 shot - Forged Stainless Steel Shot – Feng Erda

    New Fashion Design for S550 shot - Forged Stainless Steel Shot – Feng Erda

    Model/Size:0.2-2.5mm Product Detail: The Forged stainless steel shot is made of SUS200, 300, 400 series stainless steel wire and ground into balls of different roundness.Stainless steel shot has good heat resistance,corrosion resistance,glossy surface.It can take perfect effect to the stainless steel workpieces,colorful casting and products which require high surface quality.size ranging from 0.20mm to 2.50mm. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COM...
  • Competitive Price for Best Steel Shot For Geese - Cut Wire Shot/Used Wire – Feng Erda

    Competitive Price for Best Steel Shot For Geese - Cut Wire Shot/Used Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: The recycled steel cut wire shot is kind of product which use the recycled material,its material cost is lower,and  difficult to produce high precision products,this kind of product can only be used to clean the cast surface.It’s mainly uesd in the public areas.For customers who do not have special requirements on the surface of the workpiece, we strongly recommend you to use the old wire cut shot, save the cost, and more abrasion resistant than casting...
  • Newly Arrival Hevi Shot Hevi Steel - Bearing Angular Steel Grit – Feng Erda

    Newly Arrival Hevi Shot Hevi Steel - Bearing Angular Steel Grit – Feng Erda

    Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: Bearing Angular Steel Grit is made of brokened Bearing plates.The bearing steel has Cr,Mo rare elements,it has good stability inside structure .Bearing anguler steel grit has high stable performance,high wear resistance,its working life is 2.5 times as long as high-carbon steel grit and low carbin steel grit. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.65-1.2% P ≤0.025% ISO 9556:1989 ISO ...
  • Factory made hot-sale S170 Steel Shot - High Carbon Rounded Steel Shot – Feng Erda

    Factory made hot-sale S170 Steel Shot - High Carbon Rounded Steel Shot – Feng Erda

    Model/Size:S110-S930/Φ0.3mm-2.8mm Product Detail: High carbon steel shot, made out of special steel,hardened and tempered, have a content in carbon  greater than 0.85%.through atomization process,spherical particles made of molten steel.Fengerda strictly controls every link of production, especially the control of deoxidation and decarbonization, temperature in quenching process, as well as the elimination of pores and abnormity after forming, which improves the product to a new level. Key Sp...
  • Personlized Products Abrasive Products - Zinc shot/Zinc cut wire shot – Feng Erda

    Personlized Products Abrasive Products - Zinc shot/Zinc cut wire shot – Feng Erda

    Model/Size:0.6-2.5mm Product Detail: We offer a qualitative range of Zinc Cut Wire Shots. Available at competent rates, our products reduce wear and tear on blast equipment. These Zinc cut wire shots are softer than stainless steel cut wire or cast products. Zinc cut wire shot is available in different sizes. Zinc Cut Wire Shot is produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is used mainly for sand removal, deburring and deflashi...
  • 2020 Good Quality Abrasives - Bearing Angular Steel Grit – Feng Erda

    2020 Good Quality Abrasives - Bearing Angular Steel Grit – Feng Erda

    Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: Bearing Angular Steel Grit is made of brokened Bearing plates.The bearing steel has Cr,Mo rare elements,it has good stability inside structure .Bearing anguler steel grit has high stable performance,high wear resistance,its working life is 2.5 times as long as high-carbon steel grit and low carbin steel grit. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.65-1.2% P ≤0.025% ISO 9556:1989 ISO ...
  • Original Factory Amasteel Shot - Bearing Angular Steel Grit – Feng Erda

    Original Factory Amasteel Shot - Bearing Angular Steel Grit – Feng Erda

    Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: Bearing Angular Steel Grit is made of brokened Bearing plates.The bearing steel has Cr,Mo rare elements,it has good stability inside structure .Bearing anguler steel grit has high stable performance,high wear resistance,its working life is 2.5 times as long as high-carbon steel grit and low carbin steel grit. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.65-1.2% P ≤0.025% ISO 9556:1989 ISO ...
  • Discount Price Abrasives Inc - Zinc shot/Zinc cut wire shot – Feng Erda

    Discount Price Abrasives Inc - Zinc shot/Zinc cut wire shot – Feng Erda

    Model/Size:0.6-2.5mm Product Detail: We offer a qualitative range of Zinc Cut Wire Shots. Available at competent rates, our products reduce wear and tear on blast equipment. These Zinc cut wire shots are softer than stainless steel cut wire or cast products. Zinc cut wire shot is available in different sizes. Zinc Cut Wire Shot is produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is used mainly for sand removal, deburring and deflashi...
  • Hot sale Factory Steel Grit Gl - Cut Wire Shot/Used Wire – Feng Erda

    Hot sale Factory Steel Grit Gl - Cut Wire Shot/Used Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: The recycled steel cut wire shot is kind of product which use the recycled material,its material cost is lower,and  difficult to produce high precision products,this kind of product can only be used to clean the cast surface.It’s mainly uesd in the public areas.For customers who do not have special requirements on the surface of the workpiece, we strongly recommend you to use the old wire cut shot, save the cost, and more abrasion resistant than casting...
  • Factory directly Cast Steel Grit - Aluminum shot/cut wire shot – Feng Erda

    Factory directly Cast Steel Grit - Aluminum shot/cut wire shot – Feng Erda

    Model/Size: 0.6-3.0mm  Product Detail: Aluminum cut-wire shot (Aluminum Shot) is available in mixed aluminum grades (4043, 5053) as well as alloy grades such as type 5356. Our mixed grades yield middle B range (Approximately 40) Rockwell hardness while type 5356 will yield high Rockwell B hardness in the 50 to 70 range. Applications include cleaning aluminum or other non ferrous castings that require a satin type but must also capable of removing parting lines or other blemishes. Product...
  • New Delivery for Abrasive Grit - High Carbon Angular Steel Grit – Feng Erda

    New Delivery for Abrasive Grit - High Carbon Angular Steel Grit – Feng Erda

    Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: High carbon angular steel grit is manufactured from high carbon steel shot. Steel shots that are crushed  to granular grit form and subsequently tempered  to three different hardnesses (GH, GL and GP) to cater for different applications. High carbon steel grit is widely used as a media for de- scaling steel components prior to coating. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION   0.8-1.2% P ≤0...
  • High Quality W Abrasives - Cut Wire Shot/New Wire – Feng Erda

    High Quality W Abrasives - Cut Wire Shot/New Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: Cut Wire Shot is manufactured from high quality wire which is cut to a length about equal to its diameter. The wire used to produce Cut Wire Shot can be made of Carbon Steel, Stainless Steel, Aluminum, Zinc, Nickel Alloy, Copper or other metal alloys. It still has the sharp corners from the cutting operation. As-cut wire shot is an effective cleaning abrasive but it isn’t suitable for shot peening applications since the sharp edges are potentially...
  • Well-designed Bearing grit - Bearing Angular Steel Grit – Feng Erda

    Well-designed Bearing grit - Bearing Angular Steel Grit – Feng Erda

    Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: Bearing Angular Steel Grit is made of brokened Bearing plates.The bearing steel has Cr,Mo rare elements,it has good stability inside structure .Bearing anguler steel grit has high stable performance,high wear resistance,its working life is 2.5 times as long as high-carbon steel grit and low carbin steel grit. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.65-1.2% P ≤0.025% ISO 9556:1989 ISO ...
  • Good User Reputation for Polishing shot - Low Carbon Angular Steel Grit – Feng Erda

    Good User Reputation for Polishing shot - Low Carbon Angular Steel Grit – Feng Erda

    Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982 ISO 629:1982 ISO 10714:1992   Si 0.1-2.0% Cr /     Mn 0.35-1.5% Mo /     S ≤0.05% Ni /   MICROTRUCTURE Homogeneous Martensite or Bainite GB/T 19816.5-2005 Density ≥7.0-10³kg/m³(7.0kg/dm³) GB/T 19816.4-2005 EXTERNALFORM Etched or angular surface profile, Air hole < 10%. Visual ...