Telephone
0086-632-5985228
E-mail
china_b@fengerda.com
WhatsApp
0086-18663201128

Cut wire pellets

Dependable good quality and very good credit score standing are our principles, which will help us at a top-ranking position. Adhering towards the tenet of "quality initial, shopper supreme" for Cut wire pellets, rust removal , Casting Inoculants , Ferrochrome Alloys , We normally welcome new and old buyers offers us with beneficial tips and proposals for cooperation, let us mature and produce alongside one another, also to lead to our neighborhood and employees! We now have a highly efficient crew to deal with inquiries from clients. Our intention is "100% shopper pleasure by our merchandise quality, price tag & our staff service" and take pleasure in a very good standing amongst purchasers. With quite a few factories, we can easily provide a wide vary of Cut wire pellets, Company name, is always regarding quality as company' s foundation, seeking for development via high degree of credibility , abiding by ISO quality management standard strictly, creating top-ranking company by spirit of progress-marking honesty and optimism.


  • China Factory for China Stainless Steel Shot/ Stainless Steel Cut Wire Shot 0.1mm-3.0mm

    China Factory for China Stainless Steel Shot/ Stainless Steel Cut Wire Shot 0.1mm-3.0mm

    Stainless steel shot is the media type that have become more popular. This products perform similarly to steel shot, however, is made of stainless steel. It contain a higher concentration of nickel and chromium. And is good medias to consider when ferrous contamination of the work piece cannot be

  • Rapid Delivery for China White Fused Alumina 60/70/80/100/120/180/150 Grits for Steel Sandblsating

    Rapid Delivery for China White Fused Alumina 60/70/80/100/120/180/150 Grits for Steel Sandblsating

    High carbon angular steel grit is manufactured from high carbon steel shot. Steel shots that are crushed to granular grit form and subsequently tempered to three different hardnesses (GH, GL and GP) to cater for different applications. High carbon steel grit is widely used as a media for de- scali

  • Factory Outlets China Blasting Shot, Stainless Steel Cut Wire Shot, Carbon Steel Cut Wire Shot, Aluminum Cut Wire Shot, Copper Cut Wire Shot, Zinc Cut Wire Shot, Nickel Cut Wire Shot

    Factory Outlets China Blasting Shot, Stainless Steel Cut Wire Shot, Carbon Steel Cut Wire Shot, Aluminum Cut Wire Shot, Copper Cut Wire Shot, Zinc Cut Wire Shot, Nickel Cut Wire Shot

    Aluminum cut-wire shot (Aluminum Shot) is available in mixed aluminum grades (4043, 5053) as well as alloy grades such as type 5356. Our mixed grades yield middle B range (Approximately 40) Rockwell hardness while type 5356 will yield high Rockwell B hardness in the 50 to 70 range.

  • Europe style for Low Carbon Steel Shots - Cast Stainless Steel Shot – Feng Erda

    Europe style for Low Carbon Steel Shots - Cast Stainless Steel Shot – Feng Erda

    Model/Size:0.03—3.00mm Product Detail: Stainless steel shot is the media type that have become more popular. This products perform similarly to steel shot, however, is made of stainless steel.  It contain a higher concentration of nickel and chromium.  And is good medias to consider when ferrous contamination of the work piece cannot be tolerated.  This products is cast products and is occasionally referred to as Cast Stainless Steel Shot . Using Cast Stainless Steel Shot on smooth and textur...
  • Factory wholesale Grit Steel - Cut Wire Shot/Used Wire – Feng Erda

    Factory wholesale Grit Steel - Cut Wire Shot/Used Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: The recycled steel cut wire shot is kind of product which use the recycled material,its material cost is lower,and  difficult to produce high precision products,this kind of product can only be used to clean the cast surface.It’s mainly uesd in the public areas.For customers who do not have special requirements on the surface of the workpiece, we strongly recommend you to use the old wire cut shot, save the cost, and more abrasion resistant than casting...
  • China Factory for High carbon steel shots - Forged Stainless Steel Shot – Feng Erda

    China Factory for High carbon steel shots - Forged Stainless Steel Shot – Feng Erda

    Model/Size:0.2-2.5mm Product Detail: The Forged stainless steel shot is made of SUS200, 300, 400 series stainless steel wire and ground into balls of different roundness.Stainless steel shot has good heat resistance,corrosion resistance,glossy surface.It can take perfect effect to the stainless steel workpieces,colorful casting and products which require high surface quality.size ranging from 0.20mm to 2.50mm. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COM...
  • Hot sale Steel Shot - Low Carbon Angular Steel Grit – Feng Erda

    Hot sale Steel Shot - Low Carbon Angular Steel Grit – Feng Erda

    Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982 ISO 629:1982 ISO 10714:1992   Si 0.1-2.0% Cr /     Mn 0.35-1.5% Mo /     S ≤0.05% Ni /   MICROTRUCTURE Homogeneous Martensite or Bainite GB/T 19816.5-2005 Density ≥7.0-10³kg/m³(7.0kg/dm³) GB/T 19816.4-2005 EXTERNALFORM Etched or angular surface profile, Air hole < 10%. Visual ...
  • Well-designed Cut Wire Shot - High Carbon Angular Steel Grit – Feng Erda

    Well-designed Cut Wire Shot - High Carbon Angular Steel Grit – Feng Erda

    Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: High carbon angular steel grit is manufactured from high carbon steel shot. Steel shots that are crushed  to granular grit form and subsequently tempered  to three different hardnesses (GH, GL and GP) to cater for different applications. High carbon steel grit is widely used as a media for de- scaling steel components prior to coating. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION   0.8-1.2% P ≤0...
  • China Factory for High carbon steel shots - Low Carbon Rounded Steel Shot – Feng Erda

    China Factory for High carbon steel shots - Low Carbon Rounded Steel Shot – Feng Erda

    Model/Size:S110-S930/Φ0.3mm-2.8mm Product Detail: Low carbon steel shots contain less carbon, phosphorus and sulfur than high carbon steel shots. Therefore, the internal micro structure of low carbon shots are much smoother. Low carbon steel shots are softer compared to high carbon steel shots too. This results in 20 – 40 % longer abrasive life time. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982...
  • Cheap PriceList for Forging Steel Shot - Cast Stainless Steel Shot – Feng Erda

    Cheap PriceList for Forging Steel Shot - Cast Stainless Steel Shot – Feng Erda

    Model/Size:0.03—3.00mm Product Detail: Stainless steel shot is the media type that have become more popular. This products perform similarly to steel shot, however, is made of stainless steel.  It contain a higher concentration of nickel and chromium.  And is good medias to consider when ferrous contamination of the work piece cannot be tolerated.  This products is cast products and is occasionally referred to as Cast Stainless Steel Shot . Using Cast Stainless Steel Shot on smooth and textur...
  • PriceList for round cue wire shot - High Carbon Angular Steel Grit – Feng Erda

    PriceList for round cue wire shot - High Carbon Angular Steel Grit – Feng Erda

    Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: High carbon angular steel grit is manufactured from high carbon steel shot. Steel shots that are crushed  to granular grit form and subsequently tempered  to three different hardnesses (GH, GL and GP) to cater for different applications. High carbon steel grit is widely used as a media for de- scaling steel components prior to coating. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION   0.8-1.2% P ≤0...
  • Fixed Competitive Price Aluminum Steel Shot - Cut Wire Shot/Used Wire – Feng Erda

    Fixed Competitive Price Aluminum Steel Shot - Cut Wire Shot/Used Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: The recycled steel cut wire shot is kind of product which use the recycled material,its material cost is lower,and  difficult to produce high precision products,this kind of product can only be used to clean the cast surface.It’s mainly uesd in the public areas.For customers who do not have special requirements on the surface of the workpiece, we strongly recommend you to use the old wire cut shot, save the cost, and more abrasion resistant than casting...
  • Newly Arrival Hevi Shot Hevi Steel - High Carbon Angular Steel Grit – Feng Erda

    Newly Arrival Hevi Shot Hevi Steel - High Carbon Angular Steel Grit – Feng Erda

    Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: High carbon angular steel grit is manufactured from high carbon steel shot. Steel shots that are crushed  to granular grit form and subsequently tempered  to three different hardnesses (GH, GL and GP) to cater for different applications. High carbon steel grit is widely used as a media for de- scaling steel components prior to coating. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION   0.8-1.2% P ≤0...
  • China Cheap price Steel Shot Blasting Abrasive Supplier - Low Carbon Angular Steel Grit – Feng Erda

    China Cheap price Steel Shot Blasting Abrasive Supplier - Low Carbon Angular Steel Grit – Feng Erda

    Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982 ISO 629:1982 ISO 10714:1992   Si 0.1-2.0% Cr /     Mn 0.35-1.5% Mo /     S ≤0.05% Ni /   MICROTRUCTURE Homogeneous Martensite or Bainite GB/T 19816.5-2005 Density ≥7.0-10³kg/m³(7.0kg/dm³) GB/T 19816.4-2005 EXTERNALFORM Etched or angular surface profile, Air hole < 10%. Visual ...
  • China wholesale shot peening materials - Bearing Angular Steel Grit – Feng Erda

    China wholesale shot peening materials - Bearing Angular Steel Grit – Feng Erda

    Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: Bearing Angular Steel Grit is made of brokened Bearing plates.The bearing steel has Cr,Mo rare elements,it has good stability inside structure .Bearing anguler steel grit has high stable performance,high wear resistance,its working life is 2.5 times as long as high-carbon steel grit and low carbin steel grit. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.65-1.2% P ≤0.025% ISO 9556:1989 ISO ...
  • Good User Reputation for 410 Steel Shotshells - Bearing Angular Steel Grit – Feng Erda

    Good User Reputation for 410 Steel Shotshells - Bearing Angular Steel Grit – Feng Erda

    Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: Bearing Angular Steel Grit is made of brokened Bearing plates.The bearing steel has Cr,Mo rare elements,it has good stability inside structure .Bearing anguler steel grit has high stable performance,high wear resistance,its working life is 2.5 times as long as high-carbon steel grit and low carbin steel grit. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.65-1.2% P ≤0.025% ISO 9556:1989 ISO ...
  • China Factory for High carbon steel shots - High Carbon Rounded Steel Shot – Feng Erda

    China Factory for High carbon steel shots - High Carbon Rounded Steel Shot – Feng Erda

    Model/Size:S110-S930/Φ0.3mm-2.8mm Product Detail: High carbon steel shot, made out of special steel,hardened and tempered, have a content in carbon  greater than 0.85%.through atomization process,spherical particles made of molten steel.Fengerda strictly controls every link of production, especially the control of deoxidation and decarbonization, temperature in quenching process, as well as the elimination of pores and abnormity after forming, which improves the product to a new level. Key Sp...
  • Professional China Kaitai Steel Shot - Stainless Steel Cut Wire Shot – Feng Erda

    Professional China Kaitai Steel Shot - Stainless Steel Cut Wire Shot – Feng Erda

    Model/Size:0.2-2.5mm Product Detail: Stainless steel cut wire shot is our particular specialty.It is made of SUS200, 300, 400 series stainless steel wire cut into segments. Stainless steel cut wire shot is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non-ferrous work objects could be harmful. It is also used in peening these metals (stainless steel, titanium, brass or aluminum) in work object...
  • 2020 China New Design Angular Shot - Grinding Steel Shot – Feng Erda

    2020 China New Design Angular Shot - Grinding Steel Shot – Feng Erda

    Model/Size:0.4-2.5mm Product Detail: Alloy grinding steel shot is based on the high-carbon steel shot,low-carbon steel shot,and low vanadium steel shot,considering the fatal weakness of the above products:air hole,cracks,hardness difference,develop the new products by reaserch the forging technology,it can choose the different material according to the different usage,its cost depends on the application area,can long the usage life,its has high cost performance.steel cut wire shots are availa...
  • Factory For Abrasive Blasting Services - Low Carbon Angular Steel Grit – Feng Erda

    Factory For Abrasive Blasting Services - Low Carbon Angular Steel Grit – Feng Erda

    Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982 ISO 629:1982 ISO 10714:1992   Si 0.1-2.0% Cr /     Mn 0.35-1.5% Mo /     S ≤0.05% Ni /   MICROTRUCTURE Homogeneous Martensite or Bainite GB/T 19816.5-2005 Density ≥7.0-10³kg/m³(7.0kg/dm³) GB/T 19816.4-2005 EXTERNALFORM Etched or angular surface profile, Air hole < 10%. Visual ...
  • High Performance Steel Shot Ballast - Low Carbon Rounded Steel Shot – Feng Erda

    High Performance Steel Shot Ballast - Low Carbon Rounded Steel Shot – Feng Erda

    Model/Size:S110-S930/Φ0.3mm-2.8mm Product Detail: Low carbon steel shots contain less carbon, phosphorus and sulfur than high carbon steel shots. Therefore, the internal micro structure of low carbon shots are much smoother. Low carbon steel shots are softer compared to high carbon steel shots too. This results in 20 – 40 % longer abrasive life time. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982...
  • Original Factory Steel Abrasives - High Carbon Angular Steel Grit – Feng Erda

    Original Factory Steel Abrasives - High Carbon Angular Steel Grit – Feng Erda

    Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: High carbon angular steel grit is manufactured from high carbon steel shot. Steel shots that are crushed  to granular grit form and subsequently tempered  to three different hardnesses (GH, GL and GP) to cater for different applications. High carbon steel grit is widely used as a media for de- scaling steel components prior to coating. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION   0.8-1.2% P ≤0...
  • Renewable Design for Sus430 shot - High Carbon Angular Steel Grit – Feng Erda

    Renewable Design for Sus430 shot - High Carbon Angular Steel Grit – Feng Erda

    Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: High carbon angular steel grit is manufactured from high carbon steel shot. Steel shots that are crushed  to granular grit form and subsequently tempered  to three different hardnesses (GH, GL and GP) to cater for different applications. High carbon steel grit is widely used as a media for de- scaling steel components prior to coating. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION   0.8-1.2% P ≤0...
  • Leading Manufacturer for Abrasive Sand - Cut Wire Shot/New Wire – Feng Erda

    Leading Manufacturer for Abrasive Sand - Cut Wire Shot/New Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: Cut Wire Shot is manufactured from high quality wire which is cut to a length about equal to its diameter. The wire used to produce Cut Wire Shot can be made of Carbon Steel, Stainless Steel, Aluminum, Zinc, Nickel Alloy, Copper or other metal alloys. It still has the sharp corners from the cutting operation. As-cut wire shot is an effective cleaning abrasive but it isn’t suitable for shot peening applications since the sharp edges are potentially...
  • Factory selling Steel Grits For Shot Blasting - Low Carbon Angular Steel Grit – Feng Erda

    Factory selling Steel Grits For Shot Blasting - Low Carbon Angular Steel Grit – Feng Erda

    Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982 ISO 629:1982 ISO 10714:1992   Si 0.1-2.0% Cr /     Mn 0.35-1.5% Mo /     S ≤0.05% Ni /   MICROTRUCTURE Homogeneous Martensite or Bainite GB/T 19816.5-2005 Density ≥7.0-10³kg/m³(7.0kg/dm³) GB/T 19816.4-2005 EXTERNALFORM Etched or angular surface profile, Air hole < 10%. Visual ...
  • Hot-selling High manganese steel shot - Red Copper shot/copper cut wire shot – Feng Erda

    Hot-selling High manganese steel shot - Red Copper shot/copper cut wire shot – Feng Erda

    Model/Size: 0.6-3.0mm  Product Detail: 1. Removes flash up to 0.20″ from die castings without damaging the surface Reduces wear and tear on blast equipment Removes paint and other coatings without damaging the surface of the part Thin film of zinc is deposited on steel parts during cycle providing short-term rust protection Most suitable abrasive for deflashing magnesium die castings Best choice for die castings with fine detail or delicate areas. 2. The red copper cut wire shot as...
  • Best quality Steel shot plant - Forged Stainless Steel Shot – Feng Erda

    Best quality Steel shot plant - Forged Stainless Steel Shot – Feng Erda

    Model/Size:0.2-2.5mm Product Detail: The Forged stainless steel shot is made of SUS200, 300, 400 series stainless steel wire and ground into balls of different roundness.Stainless steel shot has good heat resistance,corrosion resistance,glossy surface.It can take perfect effect to the stainless steel workpieces,colorful casting and products which require high surface quality.size ranging from 0.20mm to 2.50mm. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COM...
  • 100% Original Round Steel Balls - High Carbon Rounded Steel Shot – Feng Erda

    100% Original Round Steel Balls - High Carbon Rounded Steel Shot – Feng Erda

    Model/Size:S110-S930/Φ0.3mm-2.8mm Product Detail: High carbon steel shot, made out of special steel,hardened and tempered, have a content in carbon  greater than 0.85%.through atomization process,spherical particles made of molten steel.Fengerda strictly controls every link of production, especially the control of deoxidation and decarbonization, temperature in quenching process, as well as the elimination of pores and abnormity after forming, which improves the product to a new level. Key Sp...
  • Best-Selling Estate Steel Shot - Cut Wire Shot/Used Wire – Feng Erda

    Best-Selling Estate Steel Shot - Cut Wire Shot/Used Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: The recycled steel cut wire shot is kind of product which use the recycled material,its material cost is lower,and  difficult to produce high precision products,this kind of product can only be used to clean the cast surface.It’s mainly uesd in the public areas.For customers who do not have special requirements on the surface of the workpiece, we strongly recommend you to use the old wire cut shot, save the cost, and more abrasion resistant than casting...
  • Wholesale Aluminum Shots - High Carbon Rounded Steel Shot – Feng Erda

    Wholesale Aluminum Shots - High Carbon Rounded Steel Shot – Feng Erda

    Model/Size:S110-S930/Φ0.3mm-2.8mm Product Detail: High carbon steel shot, made out of special steel,hardened and tempered, have a content in carbon  greater than 0.85%.through atomization process,spherical particles made of molten steel.Fengerda strictly controls every link of production, especially the control of deoxidation and decarbonization, temperature in quenching process, as well as the elimination of pores and abnormity after forming, which improves the product to a new level. Key Sp...
  • Factory best selling Steel shot manufacturer - Bearing Angular Steel Grit – Feng Erda

    Factory best selling Steel shot manufacturer - Bearing Angular Steel Grit – Feng Erda

    Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: Bearing Angular Steel Grit is made of brokened Bearing plates.The bearing steel has Cr,Mo rare elements,it has good stability inside structure .Bearing anguler steel grit has high stable performance,high wear resistance,its working life is 2.5 times as long as high-carbon steel grit and low carbin steel grit. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.65-1.2% P ≤0.025% ISO 9556:1989 ISO ...
  • New Fashion Design for S550 shot - Grinding Steel Shot – Feng Erda

    New Fashion Design for S550 shot - Grinding Steel Shot – Feng Erda

    Model/Size:0.4-2.5mm Product Detail: Alloy grinding steel shot is based on the high-carbon steel shot,low-carbon steel shot,and low vanadium steel shot,considering the fatal weakness of the above products:air hole,cracks,hardness difference,develop the new products by reaserch the forging technology,it can choose the different material according to the different usage,its cost depends on the application area,can long the usage life,its has high cost performance.steel cut wire shots are availa...
  • Chinese wholesale Granalla - Forged Stainless Steel Shot – Feng Erda

    Chinese wholesale Granalla - Forged Stainless Steel Shot – Feng Erda

    Model/Size:0.2-2.5mm Product Detail: The Forged stainless steel shot is made of SUS200, 300, 400 series stainless steel wire and ground into balls of different roundness.Stainless steel shot has good heat resistance,corrosion resistance,glossy surface.It can take perfect effect to the stainless steel workpieces,colorful casting and products which require high surface quality.size ranging from 0.20mm to 2.50mm. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COM...
  • Big Discount Shot Blasting Grit - Stainless Steel Cut Wire Shot – Feng Erda

    Big Discount Shot Blasting Grit - Stainless Steel Cut Wire Shot – Feng Erda

    Model/Size:0.2-2.5mm Product Detail: Stainless steel cut wire shot is our particular specialty.It is made of SUS200, 300, 400 series stainless steel wire cut into segments. Stainless steel cut wire shot is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non-ferrous work objects could be harmful. It is also used in peening these metals (stainless steel, titanium, brass or aluminum) in work object...
  • Hot-selling Steel Shot For Sale Near Me - Forged Stainless Steel Shot – Feng Erda

    Hot-selling Steel Shot For Sale Near Me - Forged Stainless Steel Shot – Feng Erda

    Model/Size:0.2-2.5mm Product Detail: The Forged stainless steel shot is made of SUS200, 300, 400 series stainless steel wire and ground into balls of different roundness.Stainless steel shot has good heat resistance,corrosion resistance,glossy surface.It can take perfect effect to the stainless steel workpieces,colorful casting and products which require high surface quality.size ranging from 0.20mm to 2.50mm. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COM...
  • High reputation Metal additive - Stainless Steel Cut Wire Shot – Feng Erda

    High reputation Metal additive - Stainless Steel Cut Wire Shot – Feng Erda

    Model/Size:0.2-2.5mm Product Detail: Stainless steel cut wire shot is our particular specialty.It is made of SUS200, 300, 400 series stainless steel wire cut into segments. Stainless steel cut wire shot is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non-ferrous work objects could be harmful. It is also used in peening these metals (stainless steel, titanium, brass or aluminum) in work object...
  • New Delivery for Steel Shot 12 Ga - Low Carbon Rounded Steel Shot – Feng Erda

    New Delivery for Steel Shot 12 Ga - Low Carbon Rounded Steel Shot – Feng Erda

    Model/Size:S110-S930/Φ0.3mm-2.8mm Product Detail: Low carbon steel shots contain less carbon, phosphorus and sulfur than high carbon steel shots. Therefore, the internal micro structure of low carbon shots are much smoother. Low carbon steel shots are softer compared to high carbon steel shots too. This results in 20 – 40 % longer abrasive life time. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982...
  • factory low price Stainless Steel Abrasives - Cut Wire Shot/Used Wire – Feng Erda

    factory low price Stainless Steel Abrasives - Cut Wire Shot/Used Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: The recycled steel cut wire shot is kind of product which use the recycled material,its material cost is lower,and  difficult to produce high precision products,this kind of product can only be used to clean the cast surface.It’s mainly uesd in the public areas.For customers who do not have special requirements on the surface of the workpiece, we strongly recommend you to use the old wire cut shot, save the cost, and more abrasion resistant than casting...
  • Factory Cheap  - Zinc shot/Zinc cut wire shot – Feng Erda

    Factory Cheap - Zinc shot/Zinc cut wire shot – Feng Erda

    Model/Size:0.6-2.5mm Product Detail: We offer a qualitative range of Zinc Cut Wire Shots. Available at competent rates, our products reduce wear and tear on blast equipment. These Zinc cut wire shots are softer than stainless steel cut wire or cast products. Zinc cut wire shot is available in different sizes. Zinc Cut Wire Shot is produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is used mainly for sand removal, deburring and deflashi...
  • Competitive Price for Best Steel Shot For Geese - Cast Stainless Steel Shot – Feng Erda

    Competitive Price for Best Steel Shot For Geese - Cast Stainless Steel Shot – Feng Erda

    Model/Size:0.03—3.00mm Product Detail: Stainless steel shot is the media type that have become more popular. This products perform similarly to steel shot, however, is made of stainless steel.  It contain a higher concentration of nickel and chromium.  And is good medias to consider when ferrous contamination of the work piece cannot be tolerated.  This products is cast products and is occasionally referred to as Cast Stainless Steel Shot . Using Cast Stainless Steel Shot on smooth and textur...
  • Factory wholesale SPECIAL SHOT PEEN - Cut Wire Shot/New Wire – Feng Erda

    Factory wholesale SPECIAL SHOT PEEN - Cut Wire Shot/New Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: Cut Wire Shot is manufactured from high quality wire which is cut to a length about equal to its diameter. The wire used to produce Cut Wire Shot can be made of Carbon Steel, Stainless Steel, Aluminum, Zinc, Nickel Alloy, Copper or other metal alloys. It still has the sharp corners from the cutting operation. As-cut wire shot is an effective cleaning abrasive but it isn’t suitable for shot peening applications since the sharp edges are potentially...
  • OEM/ODM China Grinding Steel Shot - Low Carbon Angular Steel Grit – Feng Erda

    OEM/ODM China Grinding Steel Shot - Low Carbon Angular Steel Grit – Feng Erda

    Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982 ISO 629:1982 ISO 10714:1992   Si 0.1-2.0% Cr /     Mn 0.35-1.5% Mo /     S ≤0.05% Ni /   MICROTRUCTURE Homogeneous Martensite or Bainite GB/T 19816.5-2005 Density ≥7.0-10³kg/m³(7.0kg/dm³) GB/T 19816.4-2005 EXTERNALFORM Etched or angular surface profile, Air hole < 10%. Visual ...
  • Cheapest Price Abrasive for Cast Iron - Forging steel  ball – Feng Erda

    Cheapest Price Abrasive for Cast Iron - Forging steel ball – Feng Erda

    Model/Size:30-150mm Product Detail: Forging steel roling  ball is made of round steel as raw material, which is physically processed by new rolling and forging technology and then manufactured by special heat treatment technology. After years of experience accumulation and repeated tests, it is concluded that the most suitable materials for forging rolled steel ball are 45#, 65Mn, 70Mn, B2 (70MnCr) and so on.Of course, some factories also have special needs, our company can customize pro...
  • Wholesale Dealers of Zinc cut wire - Forging steel  ball – Feng Erda

    Wholesale Dealers of Zinc cut wire - Forging steel ball – Feng Erda

    Model/Size:30-150mm Product Detail: Forging steel roling  ball is made of round steel as raw material, which is physically processed by new rolling and forging technology and then manufactured by special heat treatment technology. After years of experience accumulation and repeated tests, it is concluded that the most suitable materials for forging rolled steel ball are 45#, 65Mn, 70Mn, B2 (70MnCr) and so on.Of course, some factories also have special needs, our company can customize pro...
  • Big discounting Steel Grit Abrasive - High Carbon Angular Steel Grit – Feng Erda

    Big discounting Steel Grit Abrasive - High Carbon Angular Steel Grit – Feng Erda

    Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: High carbon angular steel grit is manufactured from high carbon steel shot. Steel shots that are crushed  to granular grit form and subsequently tempered  to three different hardnesses (GH, GL and GP) to cater for different applications. High carbon steel grit is widely used as a media for de- scaling steel components prior to coating. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION   0.8-1.2% P ≤0...
  • Hot-selling High manganese steel shot - Bearing Angular Steel Grit – Feng Erda

    Hot-selling High manganese steel shot - Bearing Angular Steel Grit – Feng Erda

    Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: Bearing Angular Steel Grit is made of brokened Bearing plates.The bearing steel has Cr,Mo rare elements,it has good stability inside structure .Bearing anguler steel grit has high stable performance,high wear resistance,its working life is 2.5 times as long as high-carbon steel grit and low carbin steel grit. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.65-1.2% P ≤0.025% ISO 9556:1989 ISO ...
  • Online Exporter Steel shot abrasive - Low Carbon Rounded Steel Shot – Feng Erda

    Online Exporter Steel shot abrasive - Low Carbon Rounded Steel Shot – Feng Erda

    Model/Size:S110-S930/Φ0.3mm-2.8mm Product Detail: Low carbon steel shots contain less carbon, phosphorus and sulfur than high carbon steel shots. Therefore, the internal micro structure of low carbon shots are much smoother. Low carbon steel shots are softer compared to high carbon steel shots too. This results in 20 – 40 % longer abrasive life time. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982...
  • New Fashion Design for S550 shot - High Carbon Angular Steel Grit – Feng Erda

    New Fashion Design for S550 shot - High Carbon Angular Steel Grit – Feng Erda

    Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: High carbon angular steel grit is manufactured from high carbon steel shot. Steel shots that are crushed  to granular grit form and subsequently tempered  to three different hardnesses (GH, GL and GP) to cater for different applications. High carbon steel grit is widely used as a media for de- scaling steel components prior to coating. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION   0.8-1.2% P ≤0...
  • Factory Outlets Steel shots - Stainless Steel Cut Wire Shot – Feng Erda

    Factory Outlets Steel shots - Stainless Steel Cut Wire Shot – Feng Erda

    Model/Size:0.2-2.5mm Product Detail: Stainless steel cut wire shot is our particular specialty.It is made of SUS200, 300, 400 series stainless steel wire cut into segments. Stainless steel cut wire shot is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non-ferrous work objects could be harmful. It is also used in peening these metals (stainless steel, titanium, brass or aluminum) in work object...
  • China New Product Hevi Metal Steel Shot - Low Carbon Angular Steel Grit – Feng Erda

    China New Product Hevi Metal Steel Shot - Low Carbon Angular Steel Grit – Feng Erda

    Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982 ISO 629:1982 ISO 10714:1992   Si 0.1-2.0% Cr /     Mn 0.35-1.5% Mo /     S ≤0.05% Ni /   MICROTRUCTURE Homogeneous Martensite or Bainite GB/T 19816.5-2005 Density ≥7.0-10³kg/m³(7.0kg/dm³) GB/T 19816.4-2005 EXTERNALFORM Etched or angular surface profile, Air hole < 10%. Visual ...