Telephone
0086-632-5985228
E-mail
info@fengerda.com

Stainless Steel Cut Wire Shot

Short Description:

Stainless steel cut wire shot is our particular specialty.It is made of SUS200, 300, 400 series stainless steel wire cut into segments. Stainless steel cut wire shot is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium


Product Detail

Product Tags

Model/Size:0.2-2.5mm

Product Detail:

Stainless steel cut wire shot is our particular specialty.It is made of SUS200, 300, 400 series stainless steel wire cut into segments. Stainless steel cut wire shot is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non-ferrous work objects could be harmful. It is also used in peening these metals (stainless steel, titanium, brass or aluminum) in work objects that are subject to stress corrosion cracking.

Key Specifications:

PROJECT

SPECIFICATION

TEST METHOD

CHEMICAL COMPOSITION

 

≤0.8%

P

0.045%

ISO 9556:1989

ISO 439:1982

ISO 629:1982

ISO 10714:1992

Si

1.00%

Cr

18.0-20.0%

Mn

≤2.0%

Ni

8.0-10.0%

S

0.030%

Mo

/

MICROTRUCTURE

Deforned Austenite

GB/T 19816.5-2005

Density

7.8g/cm³

GB/T 19816.4-2005

EXTERNALFORM

Glossy rustless surface,cylindrical shape

Visual

HARDNESS

HV:240-600(HRC20.3-55.2)

GB/T 19816.3-2005

Raw Material :

The economic case for using stainless steel cut wire shot in peening and blast cleaning operations is quite easy to make. Cut wire does not fracture or break down during use because it is a solid piece. As a result, you get these benefits:

①Stainless steel cut wire shot has a significantly longer useful life than cast steel shot or grit and carbon cut wire shot

②Dust generation is significantly lower – blasting operations are much cleaner

③Stainless steel cut wire shot produces excellent results because of its uniformity and strength

④It will make you a “Greener” organization because disposal of spent media will be significantly reduced. (You won’t need as much shot, inventory requirements will be lower, and inbound freight will cost less.)

⑤You will NOT introduce ferrous contamination to non-ferrous castings or work objects as occurs with the use of cast steel or carbon cut wire shot

Applications:

300 SERIES

Applications: Prevents ferrous contamination when blasting or peening stainless steel, titanium, aluminum, or other non-ferrous work objects.

Specs: Available in conditioned form with certification to meet MILS 13165C, SAE J441, and aerospace specification AMS 2431/4. Stainless Steel Cut Wire Shot has a Rockwell C hardness of 50 - 58 HRC

400 SERIES

Applications: For preparing aluminum for paint removal and on aluminum die castings for deflashing and finishing.

Specs: Prevents ferrous contamination – but softer (at HRC 30 – 35) and less expensive than 300 Series Stainless.


  • Previous:
  • Next:

  • Write your message here and send it to us