Telephone
0086-632-5985228
E-mail
china_b@fengerda.com
WhatsApp
0086-18663201128

Blasting Abrasive Grit

We have now a specialist, efficiency staff to provide good quality company for our consumer. We normally follow the tenet of customer-oriented, details-focused for Blasting Abrasive Grit, Alloy Grinding Steel Shot , High carbon abrasive , 316 Stainless Steel Balls , Sincerely hope we are growing up together with our prospects all over the environment. Well-run equipment, professional sales team, and better after-sales services; We are also a unified big family, everyone stick to the company value "unification, dedication, tolerance" for Blasting Abrasive Grit, Most problems between suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question things they do not understand. We break down those barriers to ensure you get what you want to the level you expect, when you want it. Faster delivery time and the product you want is our Criterion .


  • Top Suppliers China High Quality Stainless Steel Blast Media Cut Wire Shot SUS304 Cw0.8

    Top Suppliers China High Quality Stainless Steel Blast Media Cut Wire Shot SUS304 Cw0.8

    High carbon steel shot, made out of special steel,hardened and tempered, have a content in carbon greater than 0.85%.through atomization process,spherical particles made of molten steel.Fengerda strictly controls every link of production, especially the control of deoxidation and decarboniza

  • Rapid Delivery for China White Fused Alumina 60/70/80/100/120/180/150 Grits for Steel Sandblsating

    Rapid Delivery for China White Fused Alumina 60/70/80/100/120/180/150 Grits for Steel Sandblsating

    High carbon angular steel grit is manufactured from high carbon steel shot. Steel shots that are crushed to granular grit form and subsequently tempered to three different hardnesses (GH, GL and GP) to cater for different applications. High carbon steel grit is widely used as a media for de- scali

  • Fast delivery China S110-S780/ 0.3-2.5mm Metal Abrasive Steel Shot with Saej444

    Fast delivery China S110-S780/ 0.3-2.5mm Metal Abrasive Steel Shot with Saej444

    Stainless steel shot is the media type that have become more popular. This products perform similarly to steel shot, however, is made of stainless steel. It contain a higher concentration of nickel and chromium. And is good medias to consider when ferrous contamination of the work piece cannot be

  • Best Price for China Abrasive

    Best Price for China Abrasive

    Low carbon steel shots contain less carbon, phosphorus and sulfur than high carbon steel shots. Therefore, the internal micro structure of low carbon shots are much smoother. Low carbon steel shots are softer compared to high carbon steel shots too.

  • Wholesale Price China Stainless steel cut wire - Stainless Steel Cut Wire Shot – Feng Erda

    Wholesale Price China Stainless steel cut wire - Stainless Steel Cut Wire Shot – Feng Erda

    Model/Size:0.2-2.5mm Product Detail: Stainless steel cut wire shot is our particular specialty.It is made of SUS200, 300, 400 series stainless steel wire cut into segments. Stainless steel cut wire shot is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non-ferrous work objects could be harmful. It is also used in peening these metals (stainless steel, titanium, brass or aluminum) in work object...
  • Lowest Price for High carbon abrasive - Cut Wire Shot/Used Wire – Feng Erda

    Lowest Price for High carbon abrasive - Cut Wire Shot/Used Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: The recycled steel cut wire shot is kind of product which use the recycled material,its material cost is lower,and  difficult to produce high precision products,this kind of product can only be used to clean the cast surface.It’s mainly uesd in the public areas.For customers who do not have special requirements on the surface of the workpiece, we strongly recommend you to use the old wire cut shot, save the cost, and more abrasion resistant than casting...
  • Popular Design for Sandblasting Grit - Grinding Steel Shot – Feng Erda

    Popular Design for Sandblasting Grit - Grinding Steel Shot – Feng Erda

    Model/Size:0.4-2.5mm Product Detail: Alloy grinding steel shot is based on the high-carbon steel shot,low-carbon steel shot,and low vanadium steel shot,considering the fatal weakness of the above products:air hole,cracks,hardness difference,develop the new products by reaserch the forging technology,it can choose the different material according to the different usage,its cost depends on the application area,can long the usage life,its has high cost performance.steel cut wire shots are availa...
  • Good Wholesale Vendors SS304 Stainless Steel Shot - Forged Stainless Steel Shot – Feng Erda

    Good Wholesale Vendors SS304 Stainless Steel Shot - Forged Stainless Steel Shot – Feng Erda

    Model/Size:0.2-2.5mm Product Detail: The Forged stainless steel shot is made of SUS200, 300, 400 series stainless steel wire and ground into balls of different roundness.Stainless steel shot has good heat resistance,corrosion resistance,glossy surface.It can take perfect effect to the stainless steel workpieces,colorful casting and products which require high surface quality.size ranging from 0.20mm to 2.50mm. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COM...
  • Factory best selling Steel shot manufacturer - Bearing Angular Steel Grit – Feng Erda

    Factory best selling Steel shot manufacturer - Bearing Angular Steel Grit – Feng Erda

    Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: Bearing Angular Steel Grit is made of brokened Bearing plates.The bearing steel has Cr,Mo rare elements,it has good stability inside structure .Bearing anguler steel grit has high stable performance,high wear resistance,its working life is 2.5 times as long as high-carbon steel grit and low carbin steel grit. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.65-1.2% P ≤0.025% ISO 9556:1989 ISO ...
  • Trending Products Chinese steel shot - Grinding Steel Shot – Feng Erda

    Trending Products Chinese steel shot - Grinding Steel Shot – Feng Erda

    Model/Size:0.4-2.5mm Product Detail: Alloy grinding steel shot is based on the high-carbon steel shot,low-carbon steel shot,and low vanadium steel shot,considering the fatal weakness of the above products:air hole,cracks,hardness difference,develop the new products by reaserch the forging technology,it can choose the different material according to the different usage,its cost depends on the application area,can long the usage life,its has high cost performance.steel cut wire shots are availa...
  • 2020 wholesale price Shot Blasting Machine - Forged Stainless Steel Shot – Feng Erda

    2020 wholesale price Shot Blasting Machine - Forged Stainless Steel Shot – Feng Erda

    Model/Size:0.2-2.5mm Product Detail: The Forged stainless steel shot is made of SUS200, 300, 400 series stainless steel wire and ground into balls of different roundness.Stainless steel shot has good heat resistance,corrosion resistance,glossy surface.It can take perfect effect to the stainless steel workpieces,colorful casting and products which require high surface quality.size ranging from 0.20mm to 2.50mm. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COM...
  • Wholesale metal surface treatment media - Zinc shot/Zinc cut wire shot – Feng Erda

    Wholesale metal surface treatment media - Zinc shot/Zinc cut wire shot – Feng Erda

    Model/Size:0.6-2.5mm Product Detail: We offer a qualitative range of Zinc Cut Wire Shots. Available at competent rates, our products reduce wear and tear on blast equipment. These Zinc cut wire shots are softer than stainless steel cut wire or cast products. Zinc cut wire shot is available in different sizes. Zinc Cut Wire Shot is produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is used mainly for sand removal, deburring and deflashi...
  • Newly Arrival Stainless Steel Shots - Cut Wire Shot/Used Wire – Feng Erda

    Newly Arrival Stainless Steel Shots - Cut Wire Shot/Used Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: The recycled steel cut wire shot is kind of product which use the recycled material,its material cost is lower,and  difficult to produce high precision products,this kind of product can only be used to clean the cast surface.It’s mainly uesd in the public areas.For customers who do not have special requirements on the surface of the workpiece, we strongly recommend you to use the old wire cut shot, save the cost, and more abrasion resistant than casting...
  • China Manufacturer for Bulk Steel Shot - Bearing Angular Steel Grit – Feng Erda

    China Manufacturer for Bulk Steel Shot - Bearing Angular Steel Grit – Feng Erda

    Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: Bearing Angular Steel Grit is made of brokened Bearing plates.The bearing steel has Cr,Mo rare elements,it has good stability inside structure .Bearing anguler steel grit has high stable performance,high wear resistance,its working life is 2.5 times as long as high-carbon steel grit and low carbin steel grit. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.65-1.2% P ≤0.025% ISO 9556:1989 ISO ...
  • Factory wholesale Zinc Shot - Forging steel  ball – Feng Erda

    Factory wholesale Zinc Shot - Forging steel ball – Feng Erda

    Model/Size:30-150mm Product Detail: Forging steel roling  ball is made of round steel as raw material, which is physically processed by new rolling and forging technology and then manufactured by special heat treatment technology. After years of experience accumulation and repeated tests, it is concluded that the most suitable materials for forging rolled steel ball are 45#, 65Mn, 70Mn, B2 (70MnCr) and so on.Of course, some factories also have special needs, our company can customize pro...
  • China Manufacturer for Bulk Steel Shot - Grinding Steel Shot – Feng Erda

    China Manufacturer for Bulk Steel Shot - Grinding Steel Shot – Feng Erda

    Model/Size:0.4-2.5mm Product Detail: Alloy grinding steel shot is based on the high-carbon steel shot,low-carbon steel shot,and low vanadium steel shot,considering the fatal weakness of the above products:air hole,cracks,hardness difference,develop the new products by reaserch the forging technology,it can choose the different material according to the different usage,its cost depends on the application area,can long the usage life,its has high cost performance.steel cut wire shots are availa...
  • Wholesale Discount Hi Tech Abrasives - High Carbon Rounded Steel Shot – Feng Erda

    Wholesale Discount Hi Tech Abrasives - High Carbon Rounded Steel Shot – Feng Erda

    Model/Size:S110-S930/Φ0.3mm-2.8mm Product Detail: High carbon steel shot, made out of special steel,hardened and tempered, have a content in carbon  greater than 0.85%.through atomization process,spherical particles made of molten steel.Fengerda strictly controls every link of production, especially the control of deoxidation and decarbonization, temperature in quenching process, as well as the elimination of pores and abnormity after forming, which improves the product to a new level. Key Sp...
  • Factory directly supply Stainless Steel Sand Casting - Cut Wire Shot/Used Wire – Feng Erda

    Factory directly supply Stainless Steel Sand Casting - Cut Wire Shot/Used Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: The recycled steel cut wire shot is kind of product which use the recycled material,its material cost is lower,and  difficult to produce high precision products,this kind of product can only be used to clean the cast surface.It’s mainly uesd in the public areas.For customers who do not have special requirements on the surface of the workpiece, we strongly recommend you to use the old wire cut shot, save the cost, and more abrasion resistant than casting...
  • Online Exporter Steel shot abrasive - Cut Wire Shot/New Wire – Feng Erda

    Online Exporter Steel shot abrasive - Cut Wire Shot/New Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: Cut Wire Shot is manufactured from high quality wire which is cut to a length about equal to its diameter. The wire used to produce Cut Wire Shot can be made of Carbon Steel, Stainless Steel, Aluminum, Zinc, Nickel Alloy, Copper or other metal alloys. It still has the sharp corners from the cutting operation. As-cut wire shot is an effective cleaning abrasive but it isn’t suitable for shot peening applications since the sharp edges are potentially...
  • Cheap price Stainless Steel Grit - Cut Wire Shot/Used Wire – Feng Erda

    Cheap price Stainless Steel Grit - Cut Wire Shot/Used Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: The recycled steel cut wire shot is kind of product which use the recycled material,its material cost is lower,and  difficult to produce high precision products,this kind of product can only be used to clean the cast surface.It’s mainly uesd in the public areas.For customers who do not have special requirements on the surface of the workpiece, we strongly recommend you to use the old wire cut shot, save the cost, and more abrasion resistant than casting...
  • Factory supplied Steel Grit G25 - Red Copper shot/copper cut wire shot – Feng Erda

    Factory supplied Steel Grit G25 - Red Copper shot/copper cut wire shot – Feng Erda

    Model/Size: 0.6-3.0mm  Product Detail: 1. Removes flash up to 0.20″ from die castings without damaging the surface Reduces wear and tear on blast equipment Removes paint and other coatings without damaging the surface of the part Thin film of zinc is deposited on steel parts during cycle providing short-term rust protection Most suitable abrasive for deflashing magnesium die castings Best choice for die castings with fine detail or delicate areas. 2. The red copper cut wire shot as...
  • Renewable Design for Sus430 shot - Cut Wire Shot/New Wire – Feng Erda

    Renewable Design for Sus430 shot - Cut Wire Shot/New Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: Cut Wire Shot is manufactured from high quality wire which is cut to a length about equal to its diameter. The wire used to produce Cut Wire Shot can be made of Carbon Steel, Stainless Steel, Aluminum, Zinc, Nickel Alloy, Copper or other metal alloys. It still has the sharp corners from the cutting operation. As-cut wire shot is an effective cleaning abrasive but it isn’t suitable for shot peening applications since the sharp edges are potentially...
  • Free sample for Small Steel Balls - Forging steel  ball – Feng Erda

    Free sample for Small Steel Balls - Forging steel ball – Feng Erda

    Model/Size:30-150mm Product Detail: Forging steel roling  ball is made of round steel as raw material, which is physically processed by new rolling and forging technology and then manufactured by special heat treatment technology. After years of experience accumulation and repeated tests, it is concluded that the most suitable materials for forging rolled steel ball are 45#, 65Mn, 70Mn, B2 (70MnCr) and so on.Of course, some factories also have special needs, our company can customize pro...
  • Top Quality Low Carbon Angular Steel Grit - Low Carbon Rounded Steel Shot – Feng Erda

    Top Quality Low Carbon Angular Steel Grit - Low Carbon Rounded Steel Shot – Feng Erda

    Model/Size:S110-S930/Φ0.3mm-2.8mm Product Detail: Low carbon steel shots contain less carbon, phosphorus and sulfur than high carbon steel shots. Therefore, the internal micro structure of low carbon shots are much smoother. Low carbon steel shots are softer compared to high carbon steel shots too. This results in 20 – 40 % longer abrasive life time. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982...
  • professional factory for Steel Grit Price - High Carbon Angular Steel Grit – Feng Erda

    professional factory for Steel Grit Price - High Carbon Angular Steel Grit – Feng Erda

    Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: High carbon angular steel grit is manufactured from high carbon steel shot. Steel shots that are crushed  to granular grit form and subsequently tempered  to three different hardnesses (GH, GL and GP) to cater for different applications. High carbon steel grit is widely used as a media for de- scaling steel components prior to coating. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION   0.8-1.2% P ≤0...
  • 2020 wholesale price Abrasive Media - Zinc shot/Zinc cut wire shot – Feng Erda

    2020 wholesale price Abrasive Media - Zinc shot/Zinc cut wire shot – Feng Erda

    Model/Size:0.6-2.5mm Product Detail: We offer a qualitative range of Zinc Cut Wire Shots. Available at competent rates, our products reduce wear and tear on blast equipment. These Zinc cut wire shots are softer than stainless steel cut wire or cast products. Zinc cut wire shot is available in different sizes. Zinc Cut Wire Shot is produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is used mainly for sand removal, deburring and deflashi...
  • Super Purchasing for Abrasive Blasting - Cut Wire Shot/Used Wire – Feng Erda

    Super Purchasing for Abrasive Blasting - Cut Wire Shot/Used Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: The recycled steel cut wire shot is kind of product which use the recycled material,its material cost is lower,and  difficult to produce high precision products,this kind of product can only be used to clean the cast surface.It’s mainly uesd in the public areas.For customers who do not have special requirements on the surface of the workpiece, we strongly recommend you to use the old wire cut shot, save the cost, and more abrasion resistant than casting...
  • Cheap price G1 - Cast Stainless Steel Shot – Feng Erda

    Cheap price G1 - Cast Stainless Steel Shot – Feng Erda

    Model/Size:0.03—3.00mm Product Detail: Stainless steel shot is the media type that have become more popular. This products perform similarly to steel shot, however, is made of stainless steel.  It contain a higher concentration of nickel and chromium.  And is good medias to consider when ferrous contamination of the work piece cannot be tolerated.  This products is cast products and is occasionally referred to as Cast Stainless Steel Shot . Using Cast Stainless Steel Shot on smooth and textur...
  • Special Price for Cut wire - Cut Wire Shot/Used Wire – Feng Erda

    Special Price for Cut wire - Cut Wire Shot/Used Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: The recycled steel cut wire shot is kind of product which use the recycled material,its material cost is lower,and  difficult to produce high precision products,this kind of product can only be used to clean the cast surface.It’s mainly uesd in the public areas.For customers who do not have special requirements on the surface of the workpiece, we strongly recommend you to use the old wire cut shot, save the cost, and more abrasion resistant than casting...
  • Cheap price Stainless Steel Grit - Cut Wire Shot/New Wire – Feng Erda

    Cheap price Stainless Steel Grit - Cut Wire Shot/New Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: Cut Wire Shot is manufactured from high quality wire which is cut to a length about equal to its diameter. The wire used to produce Cut Wire Shot can be made of Carbon Steel, Stainless Steel, Aluminum, Zinc, Nickel Alloy, Copper or other metal alloys. It still has the sharp corners from the cutting operation. As-cut wire shot is an effective cleaning abrasive but it isn’t suitable for shot peening applications since the sharp edges are potentially...
  • Factory source Steel Balls Price - Low Carbon Angular Steel Grit – Feng Erda

    Factory source Steel Balls Price - Low Carbon Angular Steel Grit – Feng Erda

    Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982 ISO 629:1982 ISO 10714:1992   Si 0.1-2.0% Cr /     Mn 0.35-1.5% Mo /     S ≤0.05% Ni /   MICROTRUCTURE Homogeneous Martensite or Bainite GB/T 19816.5-2005 Density ≥7.0-10³kg/m³(7.0kg/dm³) GB/T 19816.4-2005 EXTERNALFORM Etched or angular surface profile, Air hole < 10%. Visual ...
  • Excellent quality Shot Steel - Zinc shot/Zinc cut wire shot – Feng Erda

    Excellent quality Shot Steel - Zinc shot/Zinc cut wire shot – Feng Erda

    Model/Size:0.6-2.5mm Product Detail: We offer a qualitative range of Zinc Cut Wire Shots. Available at competent rates, our products reduce wear and tear on blast equipment. These Zinc cut wire shots are softer than stainless steel cut wire or cast products. Zinc cut wire shot is available in different sizes. Zinc Cut Wire Shot is produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is used mainly for sand removal, deburring and deflashi...
  • Manufactur standard rust removal - Stainless Steel Cut Wire Shot – Feng Erda

    Manufactur standard rust removal - Stainless Steel Cut Wire Shot – Feng Erda

    Model/Size:0.2-2.5mm Product Detail: Stainless steel cut wire shot is our particular specialty.It is made of SUS200, 300, 400 series stainless steel wire cut into segments. Stainless steel cut wire shot is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non-ferrous work objects could be harmful. It is also used in peening these metals (stainless steel, titanium, brass or aluminum) in work object...
  • 2020 Latest Design Carbon Steel Cut Wire Shots - Forging steel  ball – Feng Erda

    2020 Latest Design Carbon Steel Cut Wire Shots - Forging steel ball – Feng Erda

    Model/Size:30-150mm Product Detail: Forging steel roling  ball is made of round steel as raw material, which is physically processed by new rolling and forging technology and then manufactured by special heat treatment technology. After years of experience accumulation and repeated tests, it is concluded that the most suitable materials for forging rolled steel ball are 45#, 65Mn, 70Mn, B2 (70MnCr) and so on.Of course, some factories also have special needs, our company can customize pro...
  • Cheapest Factory Steel Grit Gh - Cut Wire Shot/New Wire – Feng Erda

    Cheapest Factory Steel Grit Gh - Cut Wire Shot/New Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: Cut Wire Shot is manufactured from high quality wire which is cut to a length about equal to its diameter. The wire used to produce Cut Wire Shot can be made of Carbon Steel, Stainless Steel, Aluminum, Zinc, Nickel Alloy, Copper or other metal alloys. It still has the sharp corners from the cutting operation. As-cut wire shot is an effective cleaning abrasive but it isn’t suitable for shot peening applications since the sharp edges are potentially...
  • High Quality W Abrasives - Low Carbon Angular Steel Grit – Feng Erda

    High Quality W Abrasives - Low Carbon Angular Steel Grit – Feng Erda

    Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982 ISO 629:1982 ISO 10714:1992   Si 0.1-2.0% Cr /     Mn 0.35-1.5% Mo /     S ≤0.05% Ni /   MICROTRUCTURE Homogeneous Martensite or Bainite GB/T 19816.5-2005 Density ≥7.0-10³kg/m³(7.0kg/dm³) GB/T 19816.4-2005 EXTERNALFORM Etched or angular surface profile, Air hole < 10%. Visual ...
  • Fixed Competitive Price Shot Peening - Zinc shot/Zinc cut wire shot – Feng Erda

    Fixed Competitive Price Shot Peening - Zinc shot/Zinc cut wire shot – Feng Erda

    Model/Size:0.6-2.5mm Product Detail: We offer a qualitative range of Zinc Cut Wire Shots. Available at competent rates, our products reduce wear and tear on blast equipment. These Zinc cut wire shots are softer than stainless steel cut wire or cast products. Zinc cut wire shot is available in different sizes. Zinc Cut Wire Shot is produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is used mainly for sand removal, deburring and deflashi...
  • China Gold Supplier for Steel Shot Blasting - Bearing Angular Steel Grit – Feng Erda

    China Gold Supplier for Steel Shot Blasting - Bearing Angular Steel Grit – Feng Erda

    Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: Bearing Angular Steel Grit is made of brokened Bearing plates.The bearing steel has Cr,Mo rare elements,it has good stability inside structure .Bearing anguler steel grit has high stable performance,high wear resistance,its working life is 2.5 times as long as high-carbon steel grit and low carbin steel grit. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.65-1.2% P ≤0.025% ISO 9556:1989 ISO ...
  • Fixed Competitive Price Aluminum Steel Shot - Cut Wire Shot/Used Wire – Feng Erda

    Fixed Competitive Price Aluminum Steel Shot - Cut Wire Shot/Used Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: The recycled steel cut wire shot is kind of product which use the recycled material,its material cost is lower,and  difficult to produce high precision products,this kind of product can only be used to clean the cast surface.It’s mainly uesd in the public areas.For customers who do not have special requirements on the surface of the workpiece, we strongly recommend you to use the old wire cut shot, save the cost, and more abrasion resistant than casting...
  • Factory Cheap  - Low Carbon Rounded Steel Shot – Feng Erda

    Factory Cheap - Low Carbon Rounded Steel Shot – Feng Erda

    Model/Size:S110-S930/Φ0.3mm-2.8mm Product Detail: Low carbon steel shots contain less carbon, phosphorus and sulfur than high carbon steel shots. Therefore, the internal micro structure of low carbon shots are much smoother. Low carbon steel shots are softer compared to high carbon steel shots too. This results in 20 – 40 % longer abrasive life time. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982...
  • Quality Inspection for Blasting Abrasives - Grinding Steel Shot – Feng Erda

    Quality Inspection for Blasting Abrasives - Grinding Steel Shot – Feng Erda

    Model/Size:0.4-2.5mm Product Detail: Alloy grinding steel shot is based on the high-carbon steel shot,low-carbon steel shot,and low vanadium steel shot,considering the fatal weakness of the above products:air hole,cracks,hardness difference,develop the new products by reaserch the forging technology,it can choose the different material according to the different usage,its cost depends on the application area,can long the usage life,its has high cost performance.steel cut wire shots are availa...
  • Super Purchasing for Abrasive Blasting - High Carbon Angular Steel Grit – Feng Erda

    Super Purchasing for Abrasive Blasting - High Carbon Angular Steel Grit – Feng Erda

    Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: High carbon angular steel grit is manufactured from high carbon steel shot. Steel shots that are crushed  to granular grit form and subsequently tempered  to three different hardnesses (GH, GL and GP) to cater for different applications. High carbon steel grit is widely used as a media for de- scaling steel components prior to coating. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION   0.8-1.2% P ≤0...
  • New Arrival China Stainless Steel Shot - Aluminum shot/cut wire shot – Feng Erda

    New Arrival China Stainless Steel Shot - Aluminum shot/cut wire shot – Feng Erda

    Model/Size: 0.6-3.0mm  Product Detail: Aluminum cut-wire shot (Aluminum Shot) is available in mixed aluminum grades (4043, 5053) as well as alloy grades such as type 5356. Our mixed grades yield middle B range (Approximately 40) Rockwell hardness while type 5356 will yield high Rockwell B hardness in the 50 to 70 range. Applications include cleaning aluminum or other non ferrous castings that require a satin type but must also capable of removing parting lines or other blemishes. Product...
  • Factory supplied S110 Steel Shot - Cut Wire Shot/New Wire – Feng Erda

    Factory supplied S110 Steel Shot - Cut Wire Shot/New Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: Cut Wire Shot is manufactured from high quality wire which is cut to a length about equal to its diameter. The wire used to produce Cut Wire Shot can be made of Carbon Steel, Stainless Steel, Aluminum, Zinc, Nickel Alloy, Copper or other metal alloys. It still has the sharp corners from the cutting operation. As-cut wire shot is an effective cleaning abrasive but it isn’t suitable for shot peening applications since the sharp edges are potentially...
  • Professional China S390 - Low Carbon Rounded Steel Shot – Feng Erda

    Professional China S390 - Low Carbon Rounded Steel Shot – Feng Erda

    Model/Size:S110-S930/Φ0.3mm-2.8mm Product Detail: Low carbon steel shots contain less carbon, phosphorus and sulfur than high carbon steel shots. Therefore, the internal micro structure of low carbon shots are much smoother. Low carbon steel shots are softer compared to high carbon steel shots too. This results in 20 – 40 % longer abrasive life time. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982...
  • Factory wholesale SPECIAL SHOT PEEN - Aluminum shot/cut wire shot – Feng Erda

    Factory wholesale SPECIAL SHOT PEEN - Aluminum shot/cut wire shot – Feng Erda

    Model/Size: 0.6-3.0mm  Product Detail: Aluminum cut-wire shot (Aluminum Shot) is available in mixed aluminum grades (4043, 5053) as well as alloy grades such as type 5356. Our mixed grades yield middle B range (Approximately 40) Rockwell hardness while type 5356 will yield high Rockwell B hardness in the 50 to 70 range. Applications include cleaning aluminum or other non ferrous castings that require a satin type but must also capable of removing parting lines or other blemishes. Product...
  • Discount Price Buy Steel Shot - Cut Wire Shot/Used Wire – Feng Erda

    Discount Price Buy Steel Shot - Cut Wire Shot/Used Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: The recycled steel cut wire shot is kind of product which use the recycled material,its material cost is lower,and  difficult to produce high precision products,this kind of product can only be used to clean the cast surface.It’s mainly uesd in the public areas.For customers who do not have special requirements on the surface of the workpiece, we strongly recommend you to use the old wire cut shot, save the cost, and more abrasion resistant than casting...
  • 100% Original Factory Shot Blasting Abrasive – Red Copper shot/copper cut wire shot – Feng Erda

    100% Original Factory Shot Blasting Abrasive – Red Copper shot/copper cut wire shot – Feng Erda

    Model/Size: 0.6-3.0mm  Product Detail: 1. Removes flash up to 0.20″ from die castings without damaging the surface Reduces wear and tear on blast equipment Removes paint and other coatings without damaging the surface of the part Thin film of zinc is deposited on steel parts during cycle providing short-term rust protection Most suitable abrasive for deflashing magnesium die castings Best choice for die castings with fine detail or delicate areas. 2. The red copper cut wire shot as...
  • professional factory for Steel Shots And Grits - Grinding Steel Shot – Feng Erda

    professional factory for Steel Shots And Grits - Grinding Steel Shot – Feng Erda

    Model/Size:0.4-2.5mm Product Detail: Alloy grinding steel shot is based on the high-carbon steel shot,low-carbon steel shot,and low vanadium steel shot,considering the fatal weakness of the above products:air hole,cracks,hardness difference,develop the new products by reaserch the forging technology,it can choose the different material according to the different usage,its cost depends on the application area,can long the usage life,its has high cost performance.steel cut wire shots are availa...
  • Good quality Grit - High Carbon Rounded Steel Shot – Feng Erda

    Good quality Grit - High Carbon Rounded Steel Shot – Feng Erda

    Model/Size:S110-S930/Φ0.3mm-2.8mm Product Detail: High carbon steel shot, made out of special steel,hardened and tempered, have a content in carbon  greater than 0.85%.through atomization process,spherical particles made of molten steel.Fengerda strictly controls every link of production, especially the control of deoxidation and decarbonization, temperature in quenching process, as well as the elimination of pores and abnormity after forming, which improves the product to a new level. Key Sp...