Telephone
0086-632-5985228
E-mail
info@fengerda.com

High Carbon Rounded Steel Shot

Short Description:

High carbon steel shot, made out of special steel,hardened and tempered, have a content in carbon greater than 0.85%.through atomization process,spherical particles made of molten steel.Fengerda strictly controls every link of production, especially the control of deoxidation and decarboniza


Product Detail

Product Tags

Model/Size:S110-S930/Φ0.3mm-2.8mm

Product Detail:

High carbon steel shot, made out of special steel,hardened and tempered, have a content in carbon  greater than 0.85%.through atomization process,spherical particles made of molten steel.Fengerda strictly controls every link of production, especially the control of deoxidation and decarbonization, temperature in quenching process, as well as the elimination of pores and abnormity after forming, which improves the product to a new level.

Key Specifications:

PROJECT

SPECIFICATION

TEST METHOD

CHEMICAL COMPOSITION

 

0.8-1.2%

P

≤0.05%

ISO 9556:1989

ISO 439:1982

ISO 629:1982

ISO 10714:1992

Si

≥0.4%

Cr

/

Mn

0.35-1.2%

Mo

/

S

≤0.05%

Ni

/

MICROTRUCTURE

Homogeneous Martensite or Bainite

GB/T 19816.5-2005

Density

≥7.0*10³kg/m³(7.0kg/dm³)

GB/T 19816.4-2005

EXTERNALFORM

Air hole < 10%. Conjoins. Sharp corner. Deformity Rate< 10%

Visual

HARDNESS

HV:390-530(HRC39.8-51.1)

GB/T 19816.3-2005

Processing Steps:

Advantages:

High Carbon Rounded Steel Shot using the traditional manufacturing technique,used for blast cleaning and shot peening mainly.Perfectly controlled heat treatments provide it with optimum resilience and resistance to fatigue.

and finish metal parts that require increased wear and fatigue properties. In the process, shot bombards the metal part, creating small dimples in the surface.

The dimples cause compression stresses in the surface of the part, increasing the metal's resistance to cracks, fatigue, and corrosion. Shot peening is used for critical, high-wear components such as gears, shafts and metallic skins for advanced aerodynamic products.

Applications:

Our high carbon steel shot is used in various applications like; desanding, descaling, cleaning, shot peening etc.. The centrifugal atomization process and double heat treatment at the Airblast plants, as well as continues quality control measures, ensures the shot to be of the highest quality.

Surface blast cleaning of forgings, heattreated pieces, steel pipes, sections and steel structures, surface treatment before painting, shot peening of work pieces.

Surface blast cleaning of stainless steel plates, thin steel plates, non ferrous alloys, dacromet coat.


  • Previous:
  • Next:

  • Write your message here and send it to us