Telephone
0086-632-5985228
E-mail
china_b@fengerda.com
WhatsApp
0086-18663201128

Steel Ball

Together with the "Client-Oriented" enterprise philosophy, a arduous good quality control technique, sophisticated producing equipment and a sturdy R&D staff, we generally offer superior quality merchandise, superb solutions and aggressive rates for Steel Ball, FeMn68Si18 , Ferro Silicon Manufacturers , Ferroalloys , We've been prepared to cooperate with company friends from at your home and overseas and produce a wonderful future with each other. Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" and the theory of "quality the basic, belief the very first and management the advanced" for Steel Ball, With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in this field and other industries. We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success! We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.


  • Manufactur standard Ball Steel - Red Copper shot/copper cut wire shot – Feng Erda

    Manufactur standard Ball Steel - Red Copper shot/copper cut wire shot – Feng Erda

    Model/Size: 0.6-3.0mm  Product Detail: 1. Removes flash up to 0.20″ from die castings without damaging the surface Reduces wear and tear on blast equipment Removes paint and other coatings without damaging the surface of the part Thin film of zinc is deposited on steel parts during cycle providing short-term rust protection Most suitable abrasive for deflashing magnesium die castings Best choice for die castings with fine detail or delicate areas. 2. The red copper cut wire shot as...
  • Wholesale Dealers of Zinc cut wire - Forged Stainless Steel Shot – Feng Erda

    Wholesale Dealers of Zinc cut wire - Forged Stainless Steel Shot – Feng Erda

    Model/Size:0.2-2.5mm Product Detail: The Forged stainless steel shot is made of SUS200, 300, 400 series stainless steel wire and ground into balls of different roundness.Stainless steel shot has good heat resistance,corrosion resistance,glossy surface.It can take perfect effect to the stainless steel workpieces,colorful casting and products which require high surface quality.size ranging from 0.20mm to 2.50mm. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COM...
  • One of Hottest for Fully Angular Steel Grit - Bearing Angular Steel Grit – Feng Erda

    One of Hottest for Fully Angular Steel Grit - Bearing Angular Steel Grit – Feng Erda

    Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: Bearing Angular Steel Grit is made of brokened Bearing plates.The bearing steel has Cr,Mo rare elements,it has good stability inside structure .Bearing anguler steel grit has high stable performance,high wear resistance,its working life is 2.5 times as long as high-carbon steel grit and low carbin steel grit. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.65-1.2% P ≤0.025% ISO 9556:1989 ISO ...
  • New Arrival China Stainless Steel Shot - Cast Stainless Steel Shot – Feng Erda

    New Arrival China Stainless Steel Shot - Cast Stainless Steel Shot – Feng Erda

    Model/Size:0.03—3.00mm Product Detail: Stainless steel shot is the media type that have become more popular. This products perform similarly to steel shot, however, is made of stainless steel.  It contain a higher concentration of nickel and chromium.  And is good medias to consider when ferrous contamination of the work piece cannot be tolerated.  This products is cast products and is occasionally referred to as Cast Stainless Steel Shot . Using Cast Stainless Steel Shot on smooth and textur...
  • High definition Blasting Abrasive Grit - Low Carbon Angular Steel Grit – Feng Erda

    High definition Blasting Abrasive Grit - Low Carbon Angular Steel Grit – Feng Erda

    Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982 ISO 629:1982 ISO 10714:1992   Si 0.1-2.0% Cr /     Mn 0.35-1.5% Mo /     S ≤0.05% Ni /   MICROTRUCTURE Homogeneous Martensite or Bainite GB/T 19816.5-2005 Density ≥7.0-10³kg/m³(7.0kg/dm³) GB/T 19816.4-2005 EXTERNALFORM Etched or angular surface profile, Air hole < 10%. Visual ...
  • Hot sale Factory Steel Grit Gl - Cast Stainless Steel Shot – Feng Erda

    Hot sale Factory Steel Grit Gl - Cast Stainless Steel Shot – Feng Erda

    Model/Size:0.03—3.00mm Product Detail: Stainless steel shot is the media type that have become more popular. This products perform similarly to steel shot, however, is made of stainless steel.  It contain a higher concentration of nickel and chromium.  And is good medias to consider when ferrous contamination of the work piece cannot be tolerated.  This products is cast products and is occasionally referred to as Cast Stainless Steel Shot . Using Cast Stainless Steel Shot on smooth and textur...
  • Hot sale Steel Shot - High Carbon Rounded Steel Shot – Feng Erda

    Hot sale Steel Shot - High Carbon Rounded Steel Shot – Feng Erda

    Model/Size:S110-S930/Φ0.3mm-2.8mm Product Detail: High carbon steel shot, made out of special steel,hardened and tempered, have a content in carbon  greater than 0.85%.through atomization process,spherical particles made of molten steel.Fengerda strictly controls every link of production, especially the control of deoxidation and decarbonization, temperature in quenching process, as well as the elimination of pores and abnormity after forming, which improves the product to a new level. Key Sp...
  • 18 Years Factory Steel pellets - Low Carbon Angular Steel Grit – Feng Erda

    18 Years Factory Steel pellets - Low Carbon Angular Steel Grit – Feng Erda

    Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982 ISO 629:1982 ISO 10714:1992   Si 0.1-2.0% Cr /     Mn 0.35-1.5% Mo /     S ≤0.05% Ni /   MICROTRUCTURE Homogeneous Martensite or Bainite GB/T 19816.5-2005 Density ≥7.0-10³kg/m³(7.0kg/dm³) GB/T 19816.4-2005 EXTERNALFORM Etched or angular surface profile, Air hole < 10%. Visual ...
  • Special Price for Cut wire - Cut Wire Shot/New Wire – Feng Erda

    Special Price for Cut wire - Cut Wire Shot/New Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: Cut Wire Shot is manufactured from high quality wire which is cut to a length about equal to its diameter. The wire used to produce Cut Wire Shot can be made of Carbon Steel, Stainless Steel, Aluminum, Zinc, Nickel Alloy, Copper or other metal alloys. It still has the sharp corners from the cutting operation. As-cut wire shot is an effective cleaning abrasive but it isn’t suitable for shot peening applications since the sharp edges are potentially...
  • Wholesale Price Steel cut wire - Zinc shot/Zinc cut wire shot – Feng Erda

    Wholesale Price Steel cut wire - Zinc shot/Zinc cut wire shot – Feng Erda

    Model/Size:0.6-2.5mm Product Detail: We offer a qualitative range of Zinc Cut Wire Shots. Available at competent rates, our products reduce wear and tear on blast equipment. These Zinc cut wire shots are softer than stainless steel cut wire or cast products. Zinc cut wire shot is available in different sizes. Zinc Cut Wire Shot is produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is used mainly for sand removal, deburring and deflashi...
  • Best Price for Steel Balls - Cut Wire Shot/Used Wire – Feng Erda

    Best Price for Steel Balls - Cut Wire Shot/Used Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: The recycled steel cut wire shot is kind of product which use the recycled material,its material cost is lower,and  difficult to produce high precision products,this kind of product can only be used to clean the cast surface.It’s mainly uesd in the public areas.For customers who do not have special requirements on the surface of the workpiece, we strongly recommend you to use the old wire cut shot, save the cost, and more abrasion resistant than casting...
  • Reasonable price Iron Sand Grit - Low Carbon Rounded Steel Shot – Feng Erda

    Reasonable price Iron Sand Grit - Low Carbon Rounded Steel Shot – Feng Erda

    Model/Size:S110-S930/Φ0.3mm-2.8mm Product Detail: Low carbon steel shots contain less carbon, phosphorus and sulfur than high carbon steel shots. Therefore, the internal micro structure of low carbon shots are much smoother. Low carbon steel shots are softer compared to high carbon steel shots too. This results in 20 – 40 % longer abrasive life time. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982...
  • Leading Manufacturer for Primos Jelly Head Steel Shot - Cast Stainless Steel Shot – Feng Erda

    Leading Manufacturer for Primos Jelly Head Steel Shot - Cast Stainless Steel Shot – Feng Erda

    Model/Size:0.03—3.00mm Product Detail: Stainless steel shot is the media type that have become more popular. This products perform similarly to steel shot, however, is made of stainless steel.  It contain a higher concentration of nickel and chromium.  And is good medias to consider when ferrous contamination of the work piece cannot be tolerated.  This products is cast products and is occasionally referred to as Cast Stainless Steel Shot . Using Cast Stainless Steel Shot on smooth and textur...
  • Factory Free sample Mild Steel Balls - Cast Stainless Steel Shot – Feng Erda

    Factory Free sample Mild Steel Balls - Cast Stainless Steel Shot – Feng Erda

    Model/Size:0.03—3.00mm Product Detail: Stainless steel shot is the media type that have become more popular. This products perform similarly to steel shot, however, is made of stainless steel.  It contain a higher concentration of nickel and chromium.  And is good medias to consider when ferrous contamination of the work piece cannot be tolerated.  This products is cast products and is occasionally referred to as Cast Stainless Steel Shot . Using Cast Stainless Steel Shot on smooth and textur...
  • 18 Years Factory Bearing Angular Steel Grit - Red Copper shot/copper cut wire shot – Feng Erda

    18 Years Factory Bearing Angular Steel Grit - Red Copper shot/copper cut wire shot – Feng Erda

    Model/Size: 0.6-3.0mm  Product Detail: 1. Removes flash up to 0.20″ from die castings without damaging the surface Reduces wear and tear on blast equipment Removes paint and other coatings without damaging the surface of the part Thin film of zinc is deposited on steel parts during cycle providing short-term rust protection Most suitable abrasive for deflashing magnesium die castings Best choice for die castings with fine detail or delicate areas. 2. The red copper cut wire shot as...
  • 2020 wholesale price Abrasive Media - Low Carbon Angular Steel Grit – Feng Erda

    2020 wholesale price Abrasive Media - Low Carbon Angular Steel Grit – Feng Erda

    Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982 ISO 629:1982 ISO 10714:1992   Si 0.1-2.0% Cr /     Mn 0.35-1.5% Mo /     S ≤0.05% Ni /   MICROTRUCTURE Homogeneous Martensite or Bainite GB/T 19816.5-2005 Density ≥7.0-10³kg/m³(7.0kg/dm³) GB/T 19816.4-2005 EXTERNALFORM Etched or angular surface profile, Air hole < 10%. Visual ...
  • Factory wholesale Zinc Shot - Forging steel  ball – Feng Erda

    Factory wholesale Zinc Shot - Forging steel ball – Feng Erda

    Model/Size:30-150mm Product Detail: Forging steel roling  ball is made of round steel as raw material, which is physically processed by new rolling and forging technology and then manufactured by special heat treatment technology. After years of experience accumulation and repeated tests, it is concluded that the most suitable materials for forging rolled steel ball are 45#, 65Mn, 70Mn, B2 (70MnCr) and so on.Of course, some factories also have special needs, our company can customize pro...
  • Low MOQ for Steel T Shot - Cut Wire Shot/New Wire – Feng Erda

    Low MOQ for Steel T Shot - Cut Wire Shot/New Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: Cut Wire Shot is manufactured from high quality wire which is cut to a length about equal to its diameter. The wire used to produce Cut Wire Shot can be made of Carbon Steel, Stainless Steel, Aluminum, Zinc, Nickel Alloy, Copper or other metal alloys. It still has the sharp corners from the cutting operation. As-cut wire shot is an effective cleaning abrasive but it isn’t suitable for shot peening applications since the sharp edges are potentially...
  • Hot Selling for Hybrid Abrasives - High Carbon Rounded Steel Shot – Feng Erda

    Hot Selling for Hybrid Abrasives - High Carbon Rounded Steel Shot – Feng Erda

    Model/Size:S110-S930/Φ0.3mm-2.8mm Product Detail: High carbon steel shot, made out of special steel,hardened and tempered, have a content in carbon  greater than 0.85%.through atomization process,spherical particles made of molten steel.Fengerda strictly controls every link of production, especially the control of deoxidation and decarbonization, temperature in quenching process, as well as the elimination of pores and abnormity after forming, which improves the product to a new level. Key Sp...
  • Discount Price Buy Steel Shot - Red Copper shot/copper cut wire shot – Feng Erda

    Discount Price Buy Steel Shot - Red Copper shot/copper cut wire shot – Feng Erda

    Model/Size: 0.6-3.0mm  Product Detail: 1. Removes flash up to 0.20″ from die castings without damaging the surface Reduces wear and tear on blast equipment Removes paint and other coatings without damaging the surface of the part Thin film of zinc is deposited on steel parts during cycle providing short-term rust protection Most suitable abrasive for deflashing magnesium die castings Best choice for die castings with fine detail or delicate areas. 2. The red copper cut wire shot as...
  • High definition Steelshot - Red Copper shot/copper cut wire shot – Feng Erda

    High definition Steelshot - Red Copper shot/copper cut wire shot – Feng Erda

    Model/Size: 0.6-3.0mm  Product Detail: 1. Removes flash up to 0.20″ from die castings without damaging the surface Reduces wear and tear on blast equipment Removes paint and other coatings without damaging the surface of the part Thin film of zinc is deposited on steel parts during cycle providing short-term rust protection Most suitable abrasive for deflashing magnesium die castings Best choice for die castings with fine detail or delicate areas. 2. The red copper cut wire shot as...
  • Hot-selling High manganese steel shot - Red Copper shot/copper cut wire shot – Feng Erda

    Hot-selling High manganese steel shot - Red Copper shot/copper cut wire shot – Feng Erda

    Model/Size: 0.6-3.0mm  Product Detail: 1. Removes flash up to 0.20″ from die castings without damaging the surface Reduces wear and tear on blast equipment Removes paint and other coatings without damaging the surface of the part Thin film of zinc is deposited on steel parts during cycle providing short-term rust protection Most suitable abrasive for deflashing magnesium die castings Best choice for die castings with fine detail or delicate areas. 2. The red copper cut wire shot as...
  • Best Price for Steel Balls - Cut Wire Shot/New Wire – Feng Erda

    Best Price for Steel Balls - Cut Wire Shot/New Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: Cut Wire Shot is manufactured from high quality wire which is cut to a length about equal to its diameter. The wire used to produce Cut Wire Shot can be made of Carbon Steel, Stainless Steel, Aluminum, Zinc, Nickel Alloy, Copper or other metal alloys. It still has the sharp corners from the cutting operation. As-cut wire shot is an effective cleaning abrasive but it isn’t suitable for shot peening applications since the sharp edges are potentially...
  • Rapid Delivery for Grit Blasting - Bearing Angular Steel Grit – Feng Erda

    Rapid Delivery for Grit Blasting - Bearing Angular Steel Grit – Feng Erda

    Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: Bearing Angular Steel Grit is made of brokened Bearing plates.The bearing steel has Cr,Mo rare elements,it has good stability inside structure .Bearing anguler steel grit has high stable performance,high wear resistance,its working life is 2.5 times as long as high-carbon steel grit and low carbin steel grit. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.65-1.2% P ≤0.025% ISO 9556:1989 ISO ...
  • 2020 China New Design Angular Shot - Grinding Steel Shot – Feng Erda

    2020 China New Design Angular Shot - Grinding Steel Shot – Feng Erda

    Model/Size:0.4-2.5mm Product Detail: Alloy grinding steel shot is based on the high-carbon steel shot,low-carbon steel shot,and low vanadium steel shot,considering the fatal weakness of the above products:air hole,cracks,hardness difference,develop the new products by reaserch the forging technology,it can choose the different material according to the different usage,its cost depends on the application area,can long the usage life,its has high cost performance.steel cut wire shots are availa...
  • Reliable Supplier Walmart Steel Shot - Cut Wire Shot/Used Wire – Feng Erda

    Reliable Supplier Walmart Steel Shot - Cut Wire Shot/Used Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: The recycled steel cut wire shot is kind of product which use the recycled material,its material cost is lower,and  difficult to produce high precision products,this kind of product can only be used to clean the cast surface.It’s mainly uesd in the public areas.For customers who do not have special requirements on the surface of the workpiece, we strongly recommend you to use the old wire cut shot, save the cost, and more abrasion resistant than casting...
  • PriceList for round cue wire shot - High Carbon Angular Steel Grit – Feng Erda

    PriceList for round cue wire shot - High Carbon Angular Steel Grit – Feng Erda

    Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: High carbon angular steel grit is manufactured from high carbon steel shot. Steel shots that are crushed  to granular grit form and subsequently tempered  to three different hardnesses (GH, GL and GP) to cater for different applications. High carbon steel grit is widely used as a media for de- scaling steel components prior to coating. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION   0.8-1.2% P ≤0...
  • Popular Design for Sandblasting Grit - Stainless Steel Cut Wire Shot – Feng Erda

    Popular Design for Sandblasting Grit - Stainless Steel Cut Wire Shot – Feng Erda

    Model/Size:0.2-2.5mm Product Detail: Stainless steel cut wire shot is our particular specialty.It is made of SUS200, 300, 400 series stainless steel wire cut into segments. Stainless steel cut wire shot is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non-ferrous work objects could be harmful. It is also used in peening these metals (stainless steel, titanium, brass or aluminum) in work object...
  • Cheap price G1 - Cast Stainless Steel Shot – Feng Erda

    Cheap price G1 - Cast Stainless Steel Shot – Feng Erda

    Model/Size:0.03—3.00mm Product Detail: Stainless steel shot is the media type that have become more popular. This products perform similarly to steel shot, however, is made of stainless steel.  It contain a higher concentration of nickel and chromium.  And is good medias to consider when ferrous contamination of the work piece cannot be tolerated.  This products is cast products and is occasionally referred to as Cast Stainless Steel Shot . Using Cast Stainless Steel Shot on smooth and textur...
  • Chinese wholesale Granalla - Cut Wire Shot/Used Wire – Feng Erda

    Chinese wholesale Granalla - Cut Wire Shot/Used Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: The recycled steel cut wire shot is kind of product which use the recycled material,its material cost is lower,and  difficult to produce high precision products,this kind of product can only be used to clean the cast surface.It’s mainly uesd in the public areas.For customers who do not have special requirements on the surface of the workpiece, we strongly recommend you to use the old wire cut shot, save the cost, and more abrasion resistant than casting...
  • Chinese wholesale New wire cut shot - Stainless Steel Cut Wire Shot – Feng Erda

    Chinese wholesale New wire cut shot - Stainless Steel Cut Wire Shot – Feng Erda

    Model/Size:0.2-2.5mm Product Detail: Stainless steel cut wire shot is our particular specialty.It is made of SUS200, 300, 400 series stainless steel wire cut into segments. Stainless steel cut wire shot is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non-ferrous work objects could be harmful. It is also used in peening these metals (stainless steel, titanium, brass or aluminum) in work object...
  • Ordinary Discount Steel Shot Price - Cut Wire Shot/Used Wire – Feng Erda

    Ordinary Discount Steel Shot Price - Cut Wire Shot/Used Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: The recycled steel cut wire shot is kind of product which use the recycled material,its material cost is lower,and  difficult to produce high precision products,this kind of product can only be used to clean the cast surface.It’s mainly uesd in the public areas.For customers who do not have special requirements on the surface of the workpiece, we strongly recommend you to use the old wire cut shot, save the cost, and more abrasion resistant than casting...
  • High Performance Steel Shot Ballast - Zinc shot/Zinc cut wire shot – Feng Erda

    High Performance Steel Shot Ballast - Zinc shot/Zinc cut wire shot – Feng Erda

    Model/Size:0.6-2.5mm Product Detail: We offer a qualitative range of Zinc Cut Wire Shots. Available at competent rates, our products reduce wear and tear on blast equipment. These Zinc cut wire shots are softer than stainless steel cut wire or cast products. Zinc cut wire shot is available in different sizes. Zinc Cut Wire Shot is produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is used mainly for sand removal, deburring and deflashi...
  • China Cheap price Steel Shot Blasting Abrasive Supplier - Stainless Steel Cut Wire Shot – Feng Erda

    China Cheap price Steel Shot Blasting Abrasive Supplier - Stainless Steel Cut Wire Shot – Feng Erda

    Model/Size:0.2-2.5mm Product Detail: Stainless steel cut wire shot is our particular specialty.It is made of SUS200, 300, 400 series stainless steel wire cut into segments. Stainless steel cut wire shot is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non-ferrous work objects could be harmful. It is also used in peening these metals (stainless steel, titanium, brass or aluminum) in work object...
  • New Fashion Design for Ss Steel Ball - Forging steel  ball – Feng Erda

    New Fashion Design for Ss Steel Ball - Forging steel ball – Feng Erda

    Model/Size:30-150mm Product Detail: Forging steel roling  ball is made of round steel as raw material, which is physically processed by new rolling and forging technology and then manufactured by special heat treatment technology. After years of experience accumulation and repeated tests, it is concluded that the most suitable materials for forging rolled steel ball are 45#, 65Mn, 70Mn, B2 (70MnCr) and so on.Of course, some factories also have special needs, our company can customize pro...
  • New Fashion Design for Ss Steel Ball - Cut Wire Shot/Used Wire – Feng Erda

    New Fashion Design for Ss Steel Ball - Cut Wire Shot/Used Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: The recycled steel cut wire shot is kind of product which use the recycled material,its material cost is lower,and  difficult to produce high precision products,this kind of product can only be used to clean the cast surface.It’s mainly uesd in the public areas.For customers who do not have special requirements on the surface of the workpiece, we strongly recommend you to use the old wire cut shot, save the cost, and more abrasion resistant than casting...
  • Best-Selling Stainless Steel Blasting Media - Zinc shot/Zinc cut wire shot – Feng Erda

    Best-Selling Stainless Steel Blasting Media - Zinc shot/Zinc cut wire shot – Feng Erda

    Model/Size:0.6-2.5mm Product Detail: We offer a qualitative range of Zinc Cut Wire Shots. Available at competent rates, our products reduce wear and tear on blast equipment. These Zinc cut wire shots are softer than stainless steel cut wire or cast products. Zinc cut wire shot is available in different sizes. Zinc Cut Wire Shot is produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is used mainly for sand removal, deburring and deflashi...
  • Special Design for Cheap Steel Shot - Low Carbon Rounded Steel Shot – Feng Erda

    Special Design for Cheap Steel Shot - Low Carbon Rounded Steel Shot – Feng Erda

    Model/Size:S110-S930/Φ0.3mm-2.8mm Product Detail: Low carbon steel shots contain less carbon, phosphorus and sulfur than high carbon steel shots. Therefore, the internal micro structure of low carbon shots are much smoother. Low carbon steel shots are softer compared to high carbon steel shots too. This results in 20 – 40 % longer abrasive life time. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982...
  • Manufacturing Companies for Ss Ball Price - Stainless Steel Cut Wire Shot – Feng Erda

    Manufacturing Companies for Ss Ball Price - Stainless Steel Cut Wire Shot – Feng Erda

    Model/Size:0.2-2.5mm Product Detail: Stainless steel cut wire shot is our particular specialty.It is made of SUS200, 300, 400 series stainless steel wire cut into segments. Stainless steel cut wire shot is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non-ferrous work objects could be harmful. It is also used in peening these metals (stainless steel, titanium, brass or aluminum) in work object...
  • 2020 Latest Design Metal Ball Price - Low Carbon Angular Steel Grit – Feng Erda

    2020 Latest Design Metal Ball Price - Low Carbon Angular Steel Grit – Feng Erda

    Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982 ISO 629:1982 ISO 10714:1992   Si 0.1-2.0% Cr /     Mn 0.35-1.5% Mo /     S ≤0.05% Ni /   MICROTRUCTURE Homogeneous Martensite or Bainite GB/T 19816.5-2005 Density ≥7.0-10³kg/m³(7.0kg/dm³) GB/T 19816.4-2005 EXTERNALFORM Etched or angular surface profile, Air hole < 10%. Visual ...
  • Massive Selection for Blasting Sand - Stainless Steel Cut Wire Shot – Feng Erda

    Massive Selection for Blasting Sand - Stainless Steel Cut Wire Shot – Feng Erda

    Model/Size:0.2-2.5mm Product Detail: Stainless steel cut wire shot is our particular specialty.It is made of SUS200, 300, 400 series stainless steel wire cut into segments. Stainless steel cut wire shot is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non-ferrous work objects could be harmful. It is also used in peening these metals (stainless steel, titanium, brass or aluminum) in work object...
  • Special Design for Peen media - Zinc shot/Zinc cut wire shot – Feng Erda

    Special Design for Peen media - Zinc shot/Zinc cut wire shot – Feng Erda

    Model/Size:0.6-2.5mm Product Detail: We offer a qualitative range of Zinc Cut Wire Shots. Available at competent rates, our products reduce wear and tear on blast equipment. These Zinc cut wire shots are softer than stainless steel cut wire or cast products. Zinc cut wire shot is available in different sizes. Zinc Cut Wire Shot is produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is used mainly for sand removal, deburring and deflashi...
  • Trending Products Chinese steel shot - Forged Stainless Steel Shot – Feng Erda

    Trending Products Chinese steel shot - Forged Stainless Steel Shot – Feng Erda

    Model/Size:0.2-2.5mm Product Detail: The Forged stainless steel shot is made of SUS200, 300, 400 series stainless steel wire and ground into balls of different roundness.Stainless steel shot has good heat resistance,corrosion resistance,glossy surface.It can take perfect effect to the stainless steel workpieces,colorful casting and products which require high surface quality.size ranging from 0.20mm to 2.50mm. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COM...
  • 2020 New Style G30 Steel Grit - Cut Wire Shot/Used Wire – Feng Erda

    2020 New Style G30 Steel Grit - Cut Wire Shot/Used Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: The recycled steel cut wire shot is kind of product which use the recycled material,its material cost is lower,and  difficult to produce high precision products,this kind of product can only be used to clean the cast surface.It’s mainly uesd in the public areas.For customers who do not have special requirements on the surface of the workpiece, we strongly recommend you to use the old wire cut shot, save the cost, and more abrasion resistant than casting...
  • Renewable Design for Forged Stainless Steel Shot - Zinc shot/Zinc cut wire shot – Feng Erda

    Renewable Design for Forged Stainless Steel Shot - Zinc shot/Zinc cut wire shot – Feng Erda

    Model/Size:0.6-2.5mm Product Detail: We offer a qualitative range of Zinc Cut Wire Shots. Available at competent rates, our products reduce wear and tear on blast equipment. These Zinc cut wire shots are softer than stainless steel cut wire or cast products. Zinc cut wire shot is available in different sizes. Zinc Cut Wire Shot is produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is used mainly for sand removal, deburring and deflashi...
  • Competitive Price for Best Steel Shot For Geese - Cast Stainless Steel Shot – Feng Erda

    Competitive Price for Best Steel Shot For Geese - Cast Stainless Steel Shot – Feng Erda

    Model/Size:0.03—3.00mm Product Detail: Stainless steel shot is the media type that have become more popular. This products perform similarly to steel shot, however, is made of stainless steel.  It contain a higher concentration of nickel and chromium.  And is good medias to consider when ferrous contamination of the work piece cannot be tolerated.  This products is cast products and is occasionally referred to as Cast Stainless Steel Shot . Using Cast Stainless Steel Shot on smooth and textur...
  • Short Lead Time for Best Steel Shot - High Carbon Angular Steel Grit – Feng Erda

    Short Lead Time for Best Steel Shot - High Carbon Angular Steel Grit – Feng Erda

    Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: High carbon angular steel grit is manufactured from high carbon steel shot. Steel shots that are crushed  to granular grit form and subsequently tempered  to three different hardnesses (GH, GL and GP) to cater for different applications. High carbon steel grit is widely used as a media for de- scaling steel components prior to coating. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION   0.8-1.2% P ≤0...
  • Original Factory Steel Abrasives - Bearing Angular Steel Grit – Feng Erda

    Original Factory Steel Abrasives - Bearing Angular Steel Grit – Feng Erda

    Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: Bearing Angular Steel Grit is made of brokened Bearing plates.The bearing steel has Cr,Mo rare elements,it has good stability inside structure .Bearing anguler steel grit has high stable performance,high wear resistance,its working life is 2.5 times as long as high-carbon steel grit and low carbin steel grit. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.65-1.2% P ≤0.025% ISO 9556:1989 ISO ...
  • Personlized Products Steel Ball With Hole - Zinc shot/Zinc cut wire shot – Feng Erda

    Personlized Products Steel Ball With Hole - Zinc shot/Zinc cut wire shot – Feng Erda

    Model/Size:0.6-2.5mm Product Detail: We offer a qualitative range of Zinc Cut Wire Shots. Available at competent rates, our products reduce wear and tear on blast equipment. These Zinc cut wire shots are softer than stainless steel cut wire or cast products. Zinc cut wire shot is available in different sizes. Zinc Cut Wire Shot is produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is used mainly for sand removal, deburring and deflashi...
  • Super Lowest Price Steel Sand - Red Copper shot/copper cut wire shot – Feng Erda

    Super Lowest Price Steel Sand - Red Copper shot/copper cut wire shot – Feng Erda

    Model/Size: 0.6-3.0mm  Product Detail: 1. Removes flash up to 0.20″ from die castings without damaging the surface Reduces wear and tear on blast equipment Removes paint and other coatings without damaging the surface of the part Thin film of zinc is deposited on steel parts during cycle providing short-term rust protection Most suitable abrasive for deflashing magnesium die castings Best choice for die castings with fine detail or delicate areas. 2. The red copper cut wire shot as...