Telephone
0086-632-5985228
E-mail
info@fengerda.com
  • 2020 wholesale price Abrasive Media - Cast Stainless Steel Shot – Feng Erda

    2020 wholesale price Abrasive Media - Cast Stainless Steel Shot – Feng Erda

    Model/Size:0.03—3.00mm Product Detail: Stainless steel shot is the media type that have become more popular. This products perform similarly to steel shot, however, is made of stainless steel.  It contain a higher concentration of nickel and chromium.  And is good medias to consider when ferrous contamination of the work piece cannot be tolerated.  This products is cast products and is occasionally referred to as Cast Stainless Steel Shot . Using Cast Stainless Steel Shot on smooth and textur...
  • Cheap price Stainless Steel Grit - Cut Wire Shot/New Wire – Feng Erda

    Cheap price Stainless Steel Grit - Cut Wire Shot/New Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: Cut Wire Shot is manufactured from high quality wire which is cut to a length about equal to its diameter. The wire used to produce Cut Wire Shot can be made of Carbon Steel, Stainless Steel, Aluminum, Zinc, Nickel Alloy, Copper or other metal alloys. It still has the sharp corners from the cutting operation. As-cut wire shot is an effective cleaning abrasive but it isn’t suitable for shot peening applications since the sharp edges are potentially...
  • Special Price for Cut wire - High Carbon Angular Steel Grit – Feng Erda

    Special Price for Cut wire - High Carbon Angular Steel Grit – Feng Erda

    Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: High carbon angular steel grit is manufactured from high carbon steel shot. Steel shots that are crushed  to granular grit form and subsequently tempered  to three different hardnesses (GH, GL and GP) to cater for different applications. High carbon steel grit is widely used as a media for de- scaling steel components prior to coating. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION   0.8-1.2% P ≤0...
  • Lowest Price for High carbon abrasive - Cast Stainless Steel Shot – Feng Erda

    Lowest Price for High carbon abrasive - Cast Stainless Steel Shot – Feng Erda

    Model/Size:0.03—3.00mm Product Detail: Stainless steel shot is the media type that have become more popular. This products perform similarly to steel shot, however, is made of stainless steel.  It contain a higher concentration of nickel and chromium.  And is good medias to consider when ferrous contamination of the work piece cannot be tolerated.  This products is cast products and is occasionally referred to as Cast Stainless Steel Shot . Using Cast Stainless Steel Shot on smooth and textur...
  • Factory wholesale Grit Steel - Stainless Steel Cut Wire Shot – Feng Erda

    Factory wholesale Grit Steel - Stainless Steel Cut Wire Shot – Feng Erda

    Model/Size:0.2-2.5mm Product Detail: Stainless steel cut wire shot is our particular specialty.It is made of SUS200, 300, 400 series stainless steel wire cut into segments. Stainless steel cut wire shot is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non-ferrous work objects could be harmful. It is also used in peening these metals (stainless steel, titanium, brass or aluminum) in work object...
  • Factory Cheap  - Forging steel  ball – Feng Erda

    Factory Cheap - Forging steel ball – Feng Erda

    Model/Size:30-150mm Product Detail: Forging steel roling  ball is made of round steel as raw material, which is physically processed by new rolling and forging technology and then manufactured by special heat treatment technology. After years of experience accumulation and repeated tests, it is concluded that the most suitable materials for forging rolled steel ball are 45#, 65Mn, 70Mn, B2 (70MnCr) and so on.Of course, some factories also have special needs, our company can customize pro...
  • Reliable Supplier FeMn - Carburizers(Carbon raisers) – Feng Erda

    Reliable Supplier FeMn - Carburizers(Carbon raisers) – Feng Erda

    Product name: Carburizers /Carbon raisers Model/Size: 1-5mm Product Detail: Carburizer, also known as carburizing agent or carburant, is a additive in steelmaking or casting to increase the carbon content. Carburizers are used for refining steel Carburizers and cast iron Carburizers, as well as other additives to Carburizers, such as brake pad additives, as friction materials. The Carburizer belongs to the additional steelmaking and ironmaking carbon-increasing raw materials. High quality car...
  • Good Wholesale Vendors 304 Stainless Steel Balls - Forged Stainless Steel Shot – Feng Erda

    Good Wholesale Vendors 304 Stainless Steel Balls - Forged Stainless Steel Shot – Feng Erda

    Model/Size:0.2-2.5mm Product Detail: The Forged stainless steel shot is made of SUS200, 300, 400 series stainless steel wire and ground into balls of different roundness.Stainless steel shot has good heat resistance,corrosion resistance,glossy surface.It can take perfect effect to the stainless steel workpieces,colorful casting and products which require high surface quality.size ranging from 0.20mm to 2.50mm. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COM...
  • Factory Supply Bbb Steel Shot - Low Carbon Angular Steel Grit – Feng Erda

    Factory Supply Bbb Steel Shot - Low Carbon Angular Steel Grit – Feng Erda

    Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982 ISO 629:1982 ISO 10714:1992   Si 0.1-2.0% Cr /     Mn 0.35-1.5% Mo /     S ≤0.05% Ni /   MICROTRUCTURE Homogeneous Martensite or Bainite GB/T 19816.5-2005 Density ≥7.0-10³kg/m³(7.0kg/dm³) GB/T 19816.4-2005 EXTERNALFORM Etched or angular surface profile, Air hole < 10%. Visual ...
  • Factory Outlets Rolling Ball - Stainless Steel Cut Wire Shot – Feng Erda

    Factory Outlets Rolling Ball - Stainless Steel Cut Wire Shot – Feng Erda

    Model/Size:0.2-2.5mm Product Detail: Stainless steel cut wire shot is our particular specialty.It is made of SUS200, 300, 400 series stainless steel wire cut into segments. Stainless steel cut wire shot is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non-ferrous work objects could be harmful. It is also used in peening these metals (stainless steel, titanium, brass or aluminum) in work object...
  • Quality Inspection for Fiocchi 12 Gauge Steel Shot - Aluminum shot/cut wire shot – Feng Erda

    Quality Inspection for Fiocchi 12 Gauge Steel Shot - Aluminum shot/cut wire shot – Feng Erda

    Model/Size: 0.6-3.0mm  Product Detail: Aluminum cut-wire shot (Aluminum Shot) is available in mixed aluminum grades (4043, 5053) as well as alloy grades such as type 5356. Our mixed grades yield middle B range (Approximately 40) Rockwell hardness while type 5356 will yield high Rockwell B hardness in the 50 to 70 range. Applications include cleaning aluminum or other non ferrous castings that require a satin type but must also capable of removing parting lines or other blemishes. Product...
  • Factory wholesale Browning Steel Shot - High Carbon Angular Steel Grit – Feng Erda

    Factory wholesale Browning Steel Shot - High Carbon Angular Steel Grit – Feng Erda

    Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: High carbon angular steel grit is manufactured from high carbon steel shot. Steel shots that are crushed  to granular grit form and subsequently tempered  to three different hardnesses (GH, GL and GP) to cater for different applications. High carbon steel grit is widely used as a media for de- scaling steel components prior to coating. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION   0.8-1.2% P ≤0...
  • 18 Years Factory Bearing Angular Steel Grit - Grinding Steel Shot – Feng Erda

    18 Years Factory Bearing Angular Steel Grit - Grinding Steel Shot – Feng Erda

    Model/Size:0.4-2.5mm Product Detail: Alloy grinding steel shot is based on the high-carbon steel shot,low-carbon steel shot,and low vanadium steel shot,considering the fatal weakness of the above products:air hole,cracks,hardness difference,develop the new products by reaserch the forging technology,it can choose the different material according to the different usage,its cost depends on the application area,can long the usage life,its has high cost performance.steel cut wire shots are availa...
  • Hot New Products Steel Wire Angular Grit - Aluminum shot/cut wire shot – Feng Erda

    Hot New Products Steel Wire Angular Grit - Aluminum shot/cut wire shot – Feng Erda

    Model/Size: 0.6-3.0mm  Product Detail: Aluminum cut-wire shot (Aluminum Shot) is available in mixed aluminum grades (4043, 5053) as well as alloy grades such as type 5356. Our mixed grades yield middle B range (Approximately 40) Rockwell hardness while type 5356 will yield high Rockwell B hardness in the 50 to 70 range. Applications include cleaning aluminum or other non ferrous castings that require a satin type but must also capable of removing parting lines or other blemishes. Product...
  • OEM/ODM China Ferro Silicon Manufacturers - Calcium-Silicon(CaSi) – Feng Erda

    OEM/ODM China Ferro Silicon Manufacturers - Calcium-Silicon(CaSi) – Feng Erda

    Product name: Ferro Silicon Calcium inoculant (CaSi) Model/Size: 3-10mm, 10-50mm, 10-100mm Product Detail: Silicon Calcium Deoxidizer is composed of the elements of silicon, calcium and iron, is an ideal compound deoxidizer, desulfurization agent. It is widely used in high quality steel, low carbon steel, stainless steel production and nickel base alloy, titanium alloy and other special alloy production. In cast iron production,the calcium silicon alloy have inoculation effect.helped to form ...
  • One of Hottest for Low Carbon Ferro Manganese Price - Barium-Silicon(BaSi) – Feng Erda

    One of Hottest for Low Carbon Ferro Manganese Price - Barium-Silicon(BaSi) – Feng Erda

    Product name: Ferro Silicon barium inoculant (Basi) Model/Size: 0.2-0.7mm, 1-3mm, 3-10mm   Product Detail: Ferro silicon barium inoculant is a kind of FeSi-based alloy containing certain amount of barium and calcium, it can remarkably reduce the chill phenomenon, generating very little residue. Therefore, Ferro silicon barium inoculant is more effective than the inoculant that only contain calcium, in addition, it has same inoculating performance that the inoculant with higher content of ba...
  • High Quality W Abrasives - Low Carbon Angular Steel Grit – Feng Erda

    High Quality W Abrasives - Low Carbon Angular Steel Grit – Feng Erda

    Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982 ISO 629:1982 ISO 10714:1992   Si 0.1-2.0% Cr /     Mn 0.35-1.5% Mo /     S ≤0.05% Ni /   MICROTRUCTURE Homogeneous Martensite or Bainite GB/T 19816.5-2005 Density ≥7.0-10³kg/m³(7.0kg/dm³) GB/T 19816.4-2005 EXTERNALFORM Etched or angular surface profile, Air hole < 10%. Visual ...
  • Discount Price Buy Steel Shot - Low Carbon Rounded Steel Shot – Feng Erda

    Discount Price Buy Steel Shot - Low Carbon Rounded Steel Shot – Feng Erda

    Model/Size:S110-S930/Φ0.3mm-2.8mm Product Detail: Low carbon steel shots contain less carbon, phosphorus and sulfur than high carbon steel shots. Therefore, the internal micro structure of low carbon shots are much smoother. Low carbon steel shots are softer compared to high carbon steel shots too. This results in 20 – 40 % longer abrasive life time. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982...
  • Well-designed Medium Carbon Ferro Manganese - Strontium-Silicon(SrSi) – Feng Erda

    Well-designed Medium Carbon Ferro Manganese - Strontium-Silicon(SrSi) – Feng Erda

    Product name: Ferro silicon strontium inoculant (SrSi) Model/Size: 0-10mm;5-25mm/10-50mm/0.2-0.7mm/1-6mm              Product Detail: Ferro silicon strontium nucleating agent is a kind of FeSi-based alloy containing certain amount of barium and calcium, it can remarkably reduce the chill phenomenon, generating very little residue. Therefore, Ferro silicon barium inoculant is more effective than the inoculant that only contain calcium, in addition, it has same inoculating performance that th...
  • China Supplier Ferro Silico Manganese Price - Nodulizer(ReMgSiFe) – Feng Erda

    China Supplier Ferro Silico Manganese Price - Nodulizer(ReMgSiFe) – Feng Erda

    Product name: Nodulizer(ReMgSiFe) Model/Size: 5-25mm 5-20mm 3-25mm   3-20mm Product Detail:  Nodulizer is an addictive that can promote the forming of spheroidal graphite from graphite pieces in the production processes. It can foster spheroidal graphites and increase the number of spheroidal graphites so that their mechanical properties are improved. As a result, the ductility and toughness of the products have been improved so that their power and functions are greatly strengthened.  It is ...
  • High Quality Ferro Alloy - Calcium-Silicon(CaSi) – Feng Erda

    High Quality Ferro Alloy - Calcium-Silicon(CaSi) – Feng Erda

    Product name: Ferro Silicon Calcium inoculant (CaSi) Model/Size: 3-10mm, 10-50mm, 10-100mm Product Detail: Silicon Calcium Deoxidizer is composed of the elements of silicon, calcium and iron, is an ideal compound deoxidizer, desulfurization agent. It is widely used in high quality steel, low carbon steel, stainless steel production and nickel base alloy, titanium alloy and other special alloy production. In cast iron production,the calcium silicon alloy have inoculation effect.helped to form ...
  • New Fashion Design for Ferro Manganese Alloy - Strontium-Silicon(SrSi) – Feng Erda

    New Fashion Design for Ferro Manganese Alloy - Strontium-Silicon(SrSi) – Feng Erda

    Product name: Ferro silicon strontium inoculant (SrSi) Model/Size: 0-10mm;5-25mm/10-50mm/0.2-0.7mm/1-6mm              Product Detail: Ferro silicon strontium nucleating agent is a kind of FeSi-based alloy containing certain amount of barium and calcium, it can remarkably reduce the chill phenomenon, generating very little residue. Therefore, Ferro silicon barium inoculant is more effective than the inoculant that only contain calcium, in addition, it has same inoculating performance that th...
  • factory low price FeMo70 - Carburizers(Carbon raisers) – Feng Erda

    factory low price FeMo70 - Carburizers(Carbon raisers) – Feng Erda

    Product name: Carburizers /Carbon raisers Model/Size: 1-5mm Product Detail: Carburizer, also known as carburizing agent or carburant, is a additive in steelmaking or casting to increase the carbon content. Carburizers are used for refining steel Carburizers and cast iron Carburizers, as well as other additives to Carburizers, such as brake pad additives, as friction materials. The Carburizer belongs to the additional steelmaking and ironmaking carbon-increasing raw materials. High quality car...
  • Hot New Products Shot Peening Media - Cast Stainless Steel Shot – Feng Erda

    Hot New Products Shot Peening Media - Cast Stainless Steel Shot – Feng Erda

    Model/Size:0.03—3.00mm Product Detail: Stainless steel shot is the media type that have become more popular. This products perform similarly to steel shot, however, is made of stainless steel.  It contain a higher concentration of nickel and chromium.  And is good medias to consider when ferrous contamination of the work piece cannot be tolerated.  This products is cast products and is occasionally referred to as Cast Stainless Steel Shot . Using Cast Stainless Steel Shot on smooth and textur...
  • 100% Original Factory Amasteel Grit - Low Carbon Angular Steel Grit – Feng Erda

    100% Original Factory Amasteel Grit - Low Carbon Angular Steel Grit – Feng Erda

    Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982 ISO 629:1982 ISO 10714:1992   Si 0.1-2.0% Cr /     Mn 0.35-1.5% Mo /     S ≤0.05% Ni /   MICROTRUCTURE Homogeneous Martensite or Bainite GB/T 19816.5-2005 Density ≥7.0-10³kg/m³(7.0kg/dm³) GB/T 19816.4-2005 EXTERNALFORM Etched or angular surface profile, Air hole < 10%. Visual ...
  • Manufacturer for Shot Blasting Media - Cut Wire Shot/Used Wire – Feng Erda

    Manufacturer for Shot Blasting Media - Cut Wire Shot/Used Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: The recycled steel cut wire shot is kind of product which use the recycled material,its material cost is lower,and  difficult to produce high precision products,this kind of product can only be used to clean the cast surface.It’s mainly uesd in the public areas.For customers who do not have special requirements on the surface of the workpiece, we strongly recommend you to use the old wire cut shot, save the cost, and more abrasion resistant than casting...
  • High Performance Steel Shot Ballast - Stainless Steel Cut Wire Shot – Feng Erda

    High Performance Steel Shot Ballast - Stainless Steel Cut Wire Shot – Feng Erda

    Model/Size:0.2-2.5mm Product Detail: Stainless steel cut wire shot is our particular specialty.It is made of SUS200, 300, 400 series stainless steel wire cut into segments. Stainless steel cut wire shot is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non-ferrous work objects could be harmful. It is also used in peening these metals (stainless steel, titanium, brass or aluminum) in work object...
  • Factory making Steel Shot Grit - Bearing Angular Steel Grit – Feng Erda

    Factory making Steel Shot Grit - Bearing Angular Steel Grit – Feng Erda

    Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: Bearing Angular Steel Grit is made of brokened Bearing plates.The bearing steel has Cr,Mo rare elements,it has good stability inside structure .Bearing anguler steel grit has high stable performance,high wear resistance,its working life is 2.5 times as long as high-carbon steel grit and low carbin steel grit. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.65-1.2% P ≤0.025% ISO 9556:1989 ISO ...
  • 2020 High quality peening machine - Red Copper shot/copper cut wire shot – Feng Erda

    2020 High quality peening machine - Red Copper shot/copper cut wire shot – Feng Erda

    Model/Size: 0.6-3.0mm  Product Detail: 1. Removes flash up to 0.20″ from die castings without damaging the surface Reduces wear and tear on blast equipment Removes paint and other coatings without damaging the surface of the part Thin film of zinc is deposited on steel parts during cycle providing short-term rust protection Most suitable abrasive for deflashing magnesium die castings Best choice for die castings with fine detail or delicate areas. 2. The red copper cut wire shot as...
  • Ordinary Discount Steel Shot Price - Cut Wire Shot/New Wire – Feng Erda

    Ordinary Discount Steel Shot Price - Cut Wire Shot/New Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: Cut Wire Shot is manufactured from high quality wire which is cut to a length about equal to its diameter. The wire used to produce Cut Wire Shot can be made of Carbon Steel, Stainless Steel, Aluminum, Zinc, Nickel Alloy, Copper or other metal alloys. It still has the sharp corners from the cutting operation. As-cut wire shot is an effective cleaning abrasive but it isn’t suitable for shot peening applications since the sharp edges are potentially...
  • Hot Sale for Steel Cut Wire Shot - Forging steel  ball – Feng Erda

    Hot Sale for Steel Cut Wire Shot - Forging steel ball – Feng Erda

    Model/Size:30-150mm Product Detail: Forging steel roling  ball is made of round steel as raw material, which is physically processed by new rolling and forging technology and then manufactured by special heat treatment technology. After years of experience accumulation and repeated tests, it is concluded that the most suitable materials for forging rolled steel ball are 45#, 65Mn, 70Mn, B2 (70MnCr) and so on.Of course, some factories also have special needs, our company can customize pro...
  • Silicon Manganese Alloy – Feng Erda

    Silicon Manganese Alloy – Feng Erda

    Size:1-100mm Basic Info: International Brand of Silicon Manganese Alloy(GB4008-2008) Brand name chemical composition(%) Mn Si C P S Ⅰ Ⅱ Ⅲ ≤ FeMn64Si27 60.0—67.0 25.0—28.0 0.5 0.10 0.15 0.25 0.04 FeMn67Si23 63.0—70.0 22.0—25.0 0.7 0.10 0.15 0.25 0.04 FeMn68Si22 65.0—72.0 20.0—23.0 1.2 0.10 0.15 0.25 0.04 FeMn62Si23 (FeMn64Si23) 60.0—65.0 20.0—25.0 1.2 0.10 0.15 0.25 0.04 FeMn68Si18 ...
  • New Fashion Design for Ss Steel Ball - Forging steel  ball – Feng Erda

    New Fashion Design for Ss Steel Ball - Forging steel ball – Feng Erda

    Model/Size:30-150mm Product Detail: Forging steel roling  ball is made of round steel as raw material, which is physically processed by new rolling and forging technology and then manufactured by special heat treatment technology. After years of experience accumulation and repeated tests, it is concluded that the most suitable materials for forging rolled steel ball are 45#, 65Mn, 70Mn, B2 (70MnCr) and so on.Of course, some factories also have special needs, our company can customize pro...
  • High definition Blasting Abrasive Grit - Stainless Steel Cut Wire Shot – Feng Erda

    High definition Blasting Abrasive Grit - Stainless Steel Cut Wire Shot – Feng Erda

    Model/Size:0.2-2.5mm Product Detail: Stainless steel cut wire shot is our particular specialty.It is made of SUS200, 300, 400 series stainless steel wire cut into segments. Stainless steel cut wire shot is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non-ferrous work objects could be harmful. It is also used in peening these metals (stainless steel, titanium, brass or aluminum) in work object...
  • High Quality for Alloy Grinding Steel Shot - Stainless Steel Cut Wire Shot – Feng Erda

    High Quality for Alloy Grinding Steel Shot - Stainless Steel Cut Wire Shot – Feng Erda

    Model/Size:0.2-2.5mm Product Detail: Stainless steel cut wire shot is our particular specialty.It is made of SUS200, 300, 400 series stainless steel wire cut into segments. Stainless steel cut wire shot is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non-ferrous work objects could be harmful. It is also used in peening these metals (stainless steel, titanium, brass or aluminum) in work object...
  • High Performance Steel Shot Ballast - Zinc shot/Zinc cut wire shot – Feng Erda

    High Performance Steel Shot Ballast - Zinc shot/Zinc cut wire shot – Feng Erda

    Model/Size:0.6-2.5mm Product Detail: We offer a qualitative range of Zinc Cut Wire Shots. Available at competent rates, our products reduce wear and tear on blast equipment. These Zinc cut wire shots are softer than stainless steel cut wire or cast products. Zinc cut wire shot is available in different sizes. Zinc Cut Wire Shot is produced by cutting zinc wire into pellets, the length equal to the diameter of the wire. Zinc Cut Wire is used mainly for sand removal, deburring and deflashi...
  • Low price for Fecr - FerroSilicon – Feng Erda

    Low price for Fecr - FerroSilicon – Feng Erda

    Size:1-100mm Basic Info: Ferrosilicon International Brand(GB2272-2009) Brand name chemical composition Si Al Ca Mn Cr P S C Range ≤ FeSi90Al1.5 87.0—95.0 1.5 1.5 0.4 0.2 0.04 0.02 0.2 FeSi90Al3.0 87.0—95.0 3.0 1.5 0.4 0.2 0.04 0.02 0.2 FeSi75Al0.5-A 74.0—80.0 0.5 1.0 0.4 0.5 0.035 0.02 0.1 FeSi75Al0.5-B 72.0—80.0 0.5 1.0 0.5 0.5 0.04 0.02 0.2 FeSi75Al1.0-A 74.0—80.0 1.0 ...
  • High definition Steelshot - Forging steel  ball – Feng Erda

    High definition Steelshot - Forging steel ball – Feng Erda

    Model/Size:30-150mm Product Detail: Forging steel roling  ball is made of round steel as raw material, which is physically processed by new rolling and forging technology and then manufactured by special heat treatment technology. After years of experience accumulation and repeated tests, it is concluded that the most suitable materials for forging rolled steel ball are 45#, 65Mn, 70Mn, B2 (70MnCr) and so on.Of course, some factories also have special needs, our company can customize pro...
  • Super Purchasing for Casi - FerroChrome – Feng Erda

    Super Purchasing for Casi - FerroChrome – Feng Erda

    Size:1-100mm Ferrochrome (FeCr) is an alloy of chromium and iron containing between 50% and 70% chromium.Over 80% of the world’s ferrochrome is utilised in the production of stainless steel.  According to carbon content, it can be divided into:High carbon ferrochrome/HCFeCr(C:4%-8%),Medium carbon ferrochrome/MCFeCr(C:1%-4%),Low carbon ferrochrome/LCFeCr(C:0.25%-0.5%),Micro carbon ferrochrome/MCFeCr:(C:0.03 0.15%).China  for increasing proportion of the world’s ferrochrome producti...
  • Super Purchasing for Abrasive Blasting - Cut Wire Shot/New Wire – Feng Erda

    Super Purchasing for Abrasive Blasting - Cut Wire Shot/New Wire – Feng Erda

    Model/Size:Φ0.2mm-2.8mm Product Detail: Cut Wire Shot is manufactured from high quality wire which is cut to a length about equal to its diameter. The wire used to produce Cut Wire Shot can be made of Carbon Steel, Stainless Steel, Aluminum, Zinc, Nickel Alloy, Copper or other metal alloys. It still has the sharp corners from the cutting operation. As-cut wire shot is an effective cleaning abrasive but it isn’t suitable for shot peening applications since the sharp edges are potentially...
  • Cheap PriceList for Forging Steel Shot - Cast Stainless Steel Shot – Feng Erda

    Cheap PriceList for Forging Steel Shot - Cast Stainless Steel Shot – Feng Erda

    Model/Size:0.03—3.00mm Product Detail: Stainless steel shot is the media type that have become more popular. This products perform similarly to steel shot, however, is made of stainless steel.  It contain a higher concentration of nickel and chromium.  And is good medias to consider when ferrous contamination of the work piece cannot be tolerated.  This products is cast products and is occasionally referred to as Cast Stainless Steel Shot . Using Cast Stainless Steel Shot on smooth and textur...
  • Factory Outlets Hc Ferro Manganese - FerroChrome – Feng Erda

    Factory Outlets Hc Ferro Manganese - FerroChrome – Feng Erda

    Size:1-100mm Ferrochrome (FeCr) is an alloy of chromium and iron containing between 50% and 70% chromium.Over 80% of the world’s ferrochrome is utilised in the production of stainless steel.  According to carbon content, it can be divided into:High carbon ferrochrome/HCFeCr(C:4%-8%),Medium carbon ferrochrome/MCFeCr(C:1%-4%),Low carbon ferrochrome/LCFeCr(C:0.25%-0.5%),Micro carbon ferrochrome/MCFeCr:(C:0.03 0.15%).China  for increasing proportion of the world’s ferrochrome producti...
  • Hot Sale for Steel Cut Wire Shot - Low Carbon Angular Steel Grit – Feng Erda

    Hot Sale for Steel Cut Wire Shot - Low Carbon Angular Steel Grit – Feng Erda

    Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982 ISO 629:1982 ISO 10714:1992   Si 0.1-2.0% Cr /     Mn 0.35-1.5% Mo /     S ≤0.05% Ni /   MICROTRUCTURE Homogeneous Martensite or Bainite GB/T 19816.5-2005 Density ≥7.0-10³kg/m³(7.0kg/dm³) GB/T 19816.4-2005 EXTERNALFORM Etched or angular surface profile, Air hole < 10%. Visual ...
  • Good quality Ferro Silicon Calcium - Silicon Manganese Alloy – Feng Erda

    Good quality Ferro Silicon Calcium - Silicon Manganese Alloy – Feng Erda

    Size:1-100mm Basic Info: International Brand of Silicon Manganese Alloy(GB4008-2008) Brand name chemical composition(%) Mn Si C P S Ⅰ Ⅱ Ⅲ ≤ FeMn64Si27 60.0—67.0 25.0—28.0 0.5 0.10 0.15 0.25 0.04 FeMn67Si23 63.0—70.0 22.0—25.0 0.7 0.10 0.15 0.25 0.04 FeMn68Si22 65.0—72.0 20.0—23.0 1.2 0.10 0.15 0.25 0.04 FeMn62Si23 (FeMn64Si23) 60.0—65.0 20.0—25.0 1.2 0.10 0.15 0.25 0.04 FeMn68Si18 ...
  • 2020 Good Quality Abrasives - Stainless Steel Cut Wire Shot – Feng Erda

    2020 Good Quality Abrasives - Stainless Steel Cut Wire Shot – Feng Erda

    Model/Size:0.2-2.5mm Product Detail: Stainless steel cut wire shot is our particular specialty.It is made of SUS200, 300, 400 series stainless steel wire cut into segments. Stainless steel cut wire shot is being used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non-ferrous work objects could be harmful. It is also used in peening these metals (stainless steel, titanium, brass or aluminum) in work object...
  • Factory Supply Bbb Steel Shot - Low Carbon Angular Steel Grit – Feng Erda

    Factory Supply Bbb Steel Shot - Low Carbon Angular Steel Grit – Feng Erda

    Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982 ISO 629:1982 ISO 10714:1992   Si 0.1-2.0% Cr /     Mn 0.35-1.5% Mo /     S ≤0.05% Ni /   MICROTRUCTURE Homogeneous Martensite or Bainite GB/T 19816.5-2005 Density ≥7.0-10³kg/m³(7.0kg/dm³) GB/T 19816.4-2005 EXTERNALFORM Etched or angular surface profile, Air hole < 10%. Visual ...
  • Good quality Grit - Red Copper shot/copper cut wire shot – Feng Erda

    Good quality Grit - Red Copper shot/copper cut wire shot – Feng Erda

    Model/Size: 0.6-3.0mm  Product Detail: 1. Removes flash up to 0.20″ from die castings without damaging the surface Reduces wear and tear on blast equipment Removes paint and other coatings without damaging the surface of the part Thin film of zinc is deposited on steel parts during cycle providing short-term rust protection Most suitable abrasive for deflashing magnesium die castings Best choice for die castings with fine detail or delicate areas. 2. The red copper cut wire shot as...
  • Popular Design for Sandblasting Grit - High Carbon Angular Steel Grit – Feng Erda

    Popular Design for Sandblasting Grit - High Carbon Angular Steel Grit – Feng Erda

    Model/Size:G12-G150 Φ0.1mm-2.8mm Product Detail: High carbon angular steel grit is manufactured from high carbon steel shot. Steel shots that are crushed  to granular grit form and subsequently tempered  to three different hardnesses (GH, GL and GP) to cater for different applications. High carbon steel grit is widely used as a media for de- scaling steel components prior to coating. Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION   0.8-1.2% P ≤0...
  • Manufacturer for High carbon steel shot - Low Carbon Angular Steel Grit – Feng Erda

    Manufacturer for High carbon steel shot - Low Carbon Angular Steel Grit – Feng Erda

    Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982 ISO 629:1982 ISO 10714:1992   Si 0.1-2.0% Cr /     Mn 0.35-1.5% Mo /     S ≤0.05% Ni /   MICROTRUCTURE Homogeneous Martensite or Bainite GB/T 19816.5-2005 Density ≥7.0-10³kg/m³(7.0kg/dm³) GB/T 19816.4-2005 EXTERNALFORM Etched or angular surface profile, Air hole < 10%. Visual ...
  • China Gold Supplier for Bulk Steel Shot For Sale - Low Carbon Angular Steel Grit – Feng Erda

    China Gold Supplier for Bulk Steel Shot For Sale - Low Carbon Angular Steel Grit – Feng Erda

    Key Specifications: PROJECT SPECIFICATION TEST METHOD CHEMICAL COMPOSITION C 0.08-0.2% P ≤0.05% ISO 9556:1989 ISO 439:1982 ISO 629:1982 ISO 10714:1992   Si 0.1-2.0% Cr /     Mn 0.35-1.5% Mo /     S ≤0.05% Ni /   MICROTRUCTURE Homogeneous Martensite or Bainite GB/T 19816.5-2005 Density ≥7.0-10³kg/m³(7.0kg/dm³) GB/T 19816.4-2005 EXTERNALFORM Etched or angular surface profile, Air hole < 10%. Visual ...