Reasonable price Ferro Moly - Strontium-Silicon(SrSi) – Feng Erda
Reasonable price Ferro Moly - Strontium-Silicon(SrSi) – Feng Erda Detail:
Product name: Ferro silicon strontium inoculant （SrSi）
Model/Size: 0-10mm;5-25mm/10-50mm/0.2-0.7mm/1-6mm
Product Detail:
Ferro silicon strontium nucleating agent is a kind of FeSi-based alloy containing certain amount of barium and calcium, it can remarkably reduce the chill phenomenon, generating very little residue. Therefore, Ferro silicon barium inoculant is more effective than the inoculant that only contain calcium, in addition, it has same inoculating performance that the inoculant with higher content of barium and calcium would have. The combination of barium and calcium has better control on the chill than the inoculant containing calcium only has.
Ferro silicon strontium mainly used as casting inoculant ,strontium in ferrosilicon inoculant is one of the most effective promotion elemtnts ,when large undercooling degree, strontiuim has a special function .to reduce the number of eutectic group can reduce shrinkage ,shrinkage defects of casting.
China gold supplier new products FeSiSr
Key Specifications :
（Fe-Si-Sr）
|
Sr: |
Si: |
Ca: Max |
Al: Max |
|
0.6-1.0% |
46-50% |
0.1% |
0.5% |
|
0.6-1.0% |
73-78% |
0.1% |
0.5% |
|
0.7-1.1% |
73-78% |
0.1% |
0.5% |
|
0.8-1.2% |
73-78% |
0.1% |
0.5% |
|
1.0-1.5% |
70-75% |
0.1% |
0.5% |
|
2.0-3.0% |
70-75% |
0.1% |
0.5% |
Performance and features:
1. Significantly increasing graphitization core, refine graphite, promote the A-type graphite in grey iron and graphite tending to be round in ductile iron, improve spheroidizing level;
2. Immensely reduce the chilling tendency, reduce relative hardness, improving cutting performance;
3. Strong recession-resistant capability, prevent inoculation and nodulizing recession;
4. Improve the homogeneity of fracture surface, reduce shrinking tendency;
5. Stable chemical composition, homogeneous particle size, deviation in composition and quality deviation is low;
6.Low melting point (near 1300℃), easy to be melt in inoculation processing, little scum.
Application :
Ferro silicon strontium inoculant suitable for thin-walled or chilled sweet ash sulfur cast has strong ink capabilities ,but also for ductile iron ball to increase the number of ink , especially high corrosion resistance of nickel ductile iron (containing Ni14%,Cu6%,Cr2%,Si 1.5%) in addition,since it reduces white without significantly increasing the number of eutectic ,especially for applications that require no casting dense loose,the water pressure resistance gray cast to good effect ,strong ink and carbon Si-Ca of molten inoculant different allowable temperature is low .and calcium ,the amount of aluminum is low ,less shaped residue ,no vacuum casting defects.
Product detail pictures:
Related Product Guide:
Gaining purchaser gratification is our firm's intention eternally. We will make wonderful endeavours to build new and top-quality merchandise, satisfy your exclusive needs and provide you with pre-sale, on-sale and after-sale products and services for Reasonable price Ferro Moly - Strontium-Silicon(SrSi) – Feng Erda , The product will supply to all over the world, such as: Toronto, Berlin, Moscow, With good quality, reasonable price and sincere service, we enjoy a good reputation. Products are exported to South America, Australia, Southeast Asia and so on. Warmly welcome customers at home and abroad to cooperate with us for the brilliant future.
By Eric from Bangladesh - 2018.11.28 16:25
The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
By Nancy from Bhutan - 2017.06.19 13:51
