Popular Design for Low Carbon Steel Shot - High Carbon Angular Steel Grit – Feng Erda
Popular Design for Low Carbon Steel Shot - High Carbon Angular Steel Grit – Feng Erda Detail:
Model/Size:G12-G150 Φ0.1mm-2.8mm
Product Detail:
High carbon angular steel grit is manufactured from high carbon steel shot. Steel shots that are crushed to granular grit form and subsequently tempered to three different hardnesses (GH, GL and GP) to cater for different applications. High carbon steel grit is widely used as a media for de- scaling steel components prior to coating.
Key Specifications:
|
PROJECT |
SPECIFICATION |
TEST METHOD |
|||
|
CHEMICAL COMPOSITION |
|
0.8-1.2% |
P |
≤0.05% |
ISO 9556:1989 ISO 439:1982 ISO 629:1982 ISO 10714:1992 |
|
Si |
≥0.4% |
Cr |
/ |
||
|
Mn |
0.35-1.2% |
Mo |
/ |
||
|
S |
≤0.05% |
Ni |
/ |
||
|
MICROTRUCTURE |
Homogeneous Martensite or Bainite |
GB/T 19816.5-2005 |
|||
|
Density |
≥7.0-10³kg/m³（7.0kg/dm³） |
GB/T 19816.4-2005 |
|||
|
EXTERNALFORM |
Etched or angular surface profile, Air hole < 10%. |
Visual |
|||
|
HARDNESS |
HV:390-720(HRC39.8-64) |
GB/T 19816.3-2005 |
|||
Processing Steps:
Applications:
High Carbon Steel Grit GP: Has the lowest hardness in the range of 40 to 50 HRC and is also revered to as angular shot, because the grit will get a round shape during its lifetime. It Is mainly used in wheel blast machines and it has good results in the foundry industry because it cleans faster with little increase in maintenance costs and machine parts wear. GP is used for cleaning, descaling and desanding.
High Carbon Steel Grit GL: Has a medium hardness in the range 50 to 60 HRC. It is used in wheel blast machines and blast rooms and is particularly suited to heavy descaling and surface preparation requirements. Although GL is of medium hardness, it also loses its angular shape during shot blasting.
High Carbon Steel Grit GH :The maximum hardness ranging from 60 to 64 HRC. It stays angular in the operating mix and is therefore ideally suited for surface etching requirements. GH is often used in blast rooms (compressed air shot peening equipment.) for quick cleaning and to achieve an anchor profile prior to coating.
Product detail pictures:
Related Product Guide:
We know that we only thrive if we can guarantee our combined rate competiveness and good quality advantageous at the same time for Popular Design for Low Carbon Steel Shot - High Carbon Angular Steel Grit – Feng Erda , The product will supply to all over the world, such as: United States, Belize, Egypt, Be sure to feel cost-free to send us your specs and we are going to respond for you asap. We have got a experienced engineering team to serve for the every single comprehensive needs. Free samples may be sent for yourself personally to know far more facts. So that you can meet your desires, please actually feel cost-free to contact us. You could send us emails and call us straight. Additionally, we welcome visits to our factory from all over the world for much better recognizing of our corporation. nd merchandise. In our trade with merchants of several countries, we often adhere to the principle of equality and mutual advantage. It is our hope to market, by joint efforts, both trade and friendship to our mutual benefit. We look forward to getting your inquiries.
By Victor from Salt Lake City - 2017.11.11 11:41
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Honorio from Denmark - 2018.06.05 13:10
