OEM/ODM China Ferro Silicon - Strontium-Silicon(SrSi) – Feng Erda
OEM/ODM China Ferro Silicon - Strontium-Silicon(SrSi) – Feng Erda Detail:
Product name: Ferro silicon strontium inoculant （SrSi）
Model/Size: 0-10mm;5-25mm/10-50mm/0.2-0.7mm/1-6mm
Product Detail:
Ferro silicon strontium nucleating agent is a kind of FeSi-based alloy containing certain amount of barium and calcium, it can remarkably reduce the chill phenomenon, generating very little residue. Therefore, Ferro silicon barium inoculant is more effective than the inoculant that only contain calcium, in addition, it has same inoculating performance that the inoculant with higher content of barium and calcium would have. The combination of barium and calcium has better control on the chill than the inoculant containing calcium only has.
Ferro silicon strontium mainly used as casting inoculant ,strontium in ferrosilicon inoculant is one of the most effective promotion elemtnts ,when large undercooling degree, strontiuim has a special function .to reduce the number of eutectic group can reduce shrinkage ,shrinkage defects of casting.
China gold supplier new products FeSiSr
Key Specifications :
（Fe-Si-Sr）
|
Sr: |
Si: |
Ca: Max |
Al: Max |
|
0.6-1.0% |
46-50% |
0.1% |
0.5% |
|
0.6-1.0% |
73-78% |
0.1% |
0.5% |
|
0.7-1.1% |
73-78% |
0.1% |
0.5% |
|
0.8-1.2% |
73-78% |
0.1% |
0.5% |
|
1.0-1.5% |
70-75% |
0.1% |
0.5% |
|
2.0-3.0% |
70-75% |
0.1% |
0.5% |
Performance and features:
1. Significantly increasing graphitization core, refine graphite, promote the A-type graphite in grey iron and graphite tending to be round in ductile iron, improve spheroidizing level;
2. Immensely reduce the chilling tendency, reduce relative hardness, improving cutting performance;
3. Strong recession-resistant capability, prevent inoculation and nodulizing recession;
4. Improve the homogeneity of fracture surface, reduce shrinking tendency;
5. Stable chemical composition, homogeneous particle size, deviation in composition and quality deviation is low;
6.Low melting point (near 1300℃), easy to be melt in inoculation processing, little scum.
Application :
Ferro silicon strontium inoculant suitable for thin-walled or chilled sweet ash sulfur cast has strong ink capabilities ,but also for ductile iron ball to increase the number of ink , especially high corrosion resistance of nickel ductile iron (containing Ni14%,Cu6%,Cr2%,Si 1.5%) in addition,since it reduces white without significantly increasing the number of eutectic ,especially for applications that require no casting dense loose,the water pressure resistance gray cast to good effect ,strong ink and carbon Si-Ca of molten inoculant different allowable temperature is low .and calcium ,the amount of aluminum is low ,less shaped residue ,no vacuum casting defects.
Product detail pictures:
Related Product Guide:
Being supported by an highly developed and skilled IT group, we could offer you technical support on pre-sales & after-sales support for OEM/ODM China Ferro Silicon - Strontium-Silicon(SrSi) – Feng Erda , The product will supply to all over the world, such as: Mongolia, El Salvador, Suriname, Since the establishment of our company, we have realized the importance of providing good quality products and the best before-sales and after-sales services. Most problems between global suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question things they do not understand. We break down those barriers to ensure you get what you want to the level you expect, when you want it.
By Susan from Finland - 2017.05.21 12:31
We have been looking for a professional and responsible supplier, and now we find it.
By Athena from Mongolia - 2017.08.15 12:36
