High Quality Foundry Inoculants - Barium-Silicon(BaSi) – Feng Erda
High Quality Foundry Inoculants - Barium-Silicon(BaSi) – Feng Erda Detail:
Product name: Ferro Silicon barium inoculant （Basi）
Model/Size: 0.2-0.7mm, 1-3mm, 3-10mm
Product Detail:
Ferro silicon barium inoculant is a kind of FeSi-based alloy containing certain amount of barium and calcium, it can remarkably reduce the chill phenomenon, generating very little residue. Therefore, Ferro silicon barium inoculant is more effective than the inoculant that only contain calcium, in addition, it has same inoculating performance that the inoculant with higher content of barium and calcium would have. The combination of barium and calcium has better control on the chill than the inoculant containing calcium only has.
Key Specifications :
（Fe-Si-Ba）
|
FeSiBa |
Specification（%、≤、≥） |
|||||||||||||
|
Ba |
Si≥ |
Ca |
Al |
Fe |
B |
S≤ |
P≤ |
C≤ |
Ti |
Mn |
Cu |
Ni |
Cr |
|
|
FeSiBa2-3 |
2.0-3.0 |
75 |
1.0-2.0 |
1.0-1.5 |
0.05 |
0.04 |
0.5 |
|||||||
|
FeSiBa4-6 |
4.0-6.0 |
70 |
1.5-2.0 |
1.5-2.0 |
0.05 |
0.04 |
0.5 |
|||||||
|
FeSiBa4-6 |
4.0-6.0 |
70 |
1.5-2.0 |
≤1.5 |
0.05 |
0.04 |
0.5 |
|||||||
|
FeSiBa10-12 |
10.0-12.0 |
62-69 |
0.8-2.0 |
1-1.8 |
0.03 |
0.04 |
0.5 |
|||||||
|
FeSiBa20-25 |
20.0-25 |
55 |
≤2.0 |
≤2.0 |
0.03 |
0.04 |
0.5 |
|||||||
|
FeSiBa25 |
25.0-30 |
53 |
≤2.0 |
≤2.0 |
0.3 |
0.04 |
0.5 |
|||||||
|
FeSiBa30 |
30.0-35 |
50 |
≤2.0 |
≤2.0 |
0.3 |
0.04 |
0.5 |
0.4 |
||||||
|
FeSiBa35 |
35.0-40 |
48 |
≤3.0 |
≤1.5 |
0.04 |
0.04 |
1.0 |
|
||||||
Performance and features:
1. Significantly increasing graphitization core, refine graphite, promote the A-type graphite in grey iron and graphite tending to be round in ductile iron, improve spheroidizing level;
2. Immensely reduce the chilling tendency, reduce relative hardness, improving cutting performance;
3. Strong recession-resistant capability, prevent inoculation and nodulizing recession;
4. Improve the homogeneity of fracture surface, reduce shrinking tendency;
5. Stable chemical composition, homogeneous particle size, deviation in composition and quality deviation is low; 6.Low melting point (near 1300℃), easy to be melt in inoculation processing, little scum.
Application :
1. Ferro silicon barium alloy is mainly used for deoxidization and desulfurization in ductile iron casting industry .
2. It can also be used as additives in the production of ferroalloy.
Product detail pictures:
Related Product Guide:
We insist on offering high-quality production with great enterprise concept, honest product sales and also the finest and fast service. it will bring you not only the superior quality solution and huge profit, but the most significant should be to occupy the endless market for High Quality Foundry Inoculants - Barium-Silicon(BaSi) – Feng Erda , The product will supply to all over the world, such as: Southampton, Ottawa, Kazakhstan, Our company always concentrate on the development of the international market. We have a lot of customers in Russia , European countries, the USA, the Middle East countries and Africa countries. We always follow that quality is foundation while service is guarantee to meet all customers.
By Arlene from Bandung - 2017.05.02 18:28
It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!
By Victor Yanushkevich from Doha - 2018.11.06 10:04
