Cheap PriceList for Steel wire rods - High Carbon Rounded Steel Shot – Feng Erda
Cheap PriceList for Steel wire rods - High Carbon Rounded Steel Shot – Feng Erda Detail:
Model/Size:S110-S930/Φ0.3mm-2.8mm
Product Detail:
High carbon steel shot, made out of special steel,hardened and tempered, have a content in carbon greater than 0.85%.through atomization process,spherical particles made of molten steel.Fengerda strictly controls every link of production, especially the control of deoxidation and decarbonization, temperature in quenching process, as well as the elimination of pores and abnormity after forming, which improves the product to a new level.
Key Specifications:
|
PROJECT |
SPECIFICATION |
TEST METHOD |
|||
|
CHEMICAL COMPOSITION |
|
0.8-1.2% |
P |
≤0.05% |
ISO 9556:1989 ISO 439:1982 ISO 629:1982 ISO 10714:1992 |
|
Si |
≥0.4% |
Cr |
/ |
||
|
Mn |
0.35-1.2% |
Mo |
/ |
||
|
S |
≤0.05% |
Ni |
/ |
||
|
MICROTRUCTURE |
Homogeneous Martensite or Bainite |
GB/T 19816.5-2005 |
|||
|
Density |
≥7.0*10³kg/m³（7.0kg/dm³） |
GB/T 19816.4-2005 |
|||
|
EXTERNALFORM |
Air hole < 10%. Conjoins. Sharp corner. Deformity Rate< 10% |
Visual |
|||
|
HARDNESS |
HV:390-530(HRC39.8-51.1) |
GB/T 19816.3-2005 |
|||
Processing Steps:
Advantages:
High Carbon Rounded Steel Shot using the traditional manufacturing technique,used for blast cleaning and shot peening mainly.Perfectly controlled heat treatments provide it with optimum resilience and resistance to fatigue.
and finish metal parts that require increased wear and fatigue properties. In the process, shot bombards the metal part, creating small dimples in the surface.
The dimples cause compression stresses in the surface of the part, increasing the metal’s resistance to cracks, fatigue, and corrosion. Shot peening is used for critical, high-wear components such as gears, shafts and metallic skins for advanced aerodynamic products.
Applications:
Our high carbon steel shot is used in various applications like; desanding, descaling, cleaning, shot peening etc.. The centrifugal atomization process and double heat treatment at the Airblast plants, as well as continues quality control measures, ensures the shot to be of the highest quality.
Surface blast cleaning of forgings, heattreated pieces, steel pipes, sections and steel structures, surface treatment before painting, shot peening of work pieces.
Surface blast cleaning of stainless steel plates, thin steel plates, non ferrous alloys, dacromet coat.
Product detail pictures:
Related Product Guide:
We insist over the principle of enhancement of 'High high quality, Efficiency, Sincerity and Down-to-earth working approach' to offer you with superb assistance of processing for Cheap PriceList for Steel wire rods - High Carbon Rounded Steel Shot – Feng Erda , The product will supply to all over the world, such as: Netherlands, Nigeria, Macedonia, As a way to make use of the resource on the expanding information and facts in international trade, we welcome prospects from everywhere on the web and offline. In spite in the top quality products and solutions we supply, effective and satisfying consultation service is supplied by our professional after-sale service group. Solution lists and thorough parameters and any other info weil be sent for you timely for the inquiries. So make sure you get in touch with us by sending us emails or contact us if you have any concerns about our firm. ou can also get our address info from our web site and come to our enterprise. or a field survey of our solutions. We're confident that we have been going to share mutual results and build solid co-operation relations with our companions in this market. We're looking forward to your inquiries.
By Elva from Gambia - 2017.05.02 11:33
The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
By Olivia from Bahamas - 2017.02.14 13:19
