Mohala
0086-632-5985228
E-mail
info@fengerda.com
  • Bearing Angular Steel Grit

    Ho jara Angular Steel Grit

    Bearing Angular Steel Grit e entsoe ka lipoleiti tsa Bearing tse robehileng. The bearing steel e na le Cr, Mo rare elements, e na le botsitso bo botle ka hare ho sebopeho .Bearing anguler steel grit e na le ts'ebetso e tsitsitseng e phahameng, ho hanyetsa ho apara ho phahameng, bophelo ba eona ba ho sebetsa ke makhetlo a 2.5 hafeela e le teng. grit ea tšepe e phahameng ea carbon le carbin e tlaase

  • FerroSilicon

    FerroSilicon

    Ferrosilicon ke mofuta oa ferroalloy o entsoeng ka ho fokotseha ha silika kapa lehlabathe le nang le coke ka pel'a tšepe.Mehloli e tloaelehileng ea tšepe ke tšepe e senyehileng kapa millscale.Li-ferrosilicon tse nang le silicon ho fihla ho 15% li entsoe ka libopi tsa mollo tse nang le litene tsa mollo oa acid.

  • Cast Stainless Steel Shot

    Lahlela Stainless Steel Shot

    Stainless steel shot ke mofuta oa mecha ea litaba e seng e tumme haholo.Lihlahisoa tsena li sebetsa ka mokhoa o ts'oanang le lithunya tsa tšepe, leha ho le joalo, li entsoe ka tšepe e sa hloekang.E na le boemo bo phahameng ba nickel le chromium.'Me ke mecha ea phatlalatso e ntle e lokelang ho nahanoa ha tšilafalo ea ferrous ea karolo ea mosebetsi e sa khonehe

  • Carburizers(Carbon raisers)

    Li-carburizers (lihlahisoa tsa khabone)

    Carburizer, eo hape e tsejoang e le carburizing agent kapa carburant, ke tlatsetso ho ho etsa tšepe kapa ho lahla ho eketsa khabone.Li-carburizer li sebelisetsoa ho hloekisa li-Carburizer tsa tšepe le li-Carburizer tsa tšepe tse entsoeng ka tšepe, hammoho le litlatsetso tse ling ho li-Carburizer, joalo ka li-additives tsa brake pad, joalo ka friction materia.

  • Silicon Manganese Alloy

    Silicon Manganese Alloy

    Silicon manganese alloy (SiMn) e entsoe ka silicon, manganese, tšepe, k'habone e nyane le likarolo tse ling.Liphello tsa ho eketsoa ha silicomanganese ho tšepe: silicon le manganese ka bobeli li na le tšusumetso ea bohlokoa ho thepa ea tšepe.

  • Barium-Silicon(BaSi)

    Barium-Silicon(BaSi)

    Ferro silicon barium inoculant ke mofuta oa alloy e thehiloeng ho FeSi e nang le palo e itseng ea barium le calcium, e ka fokotsa ts'ebetso ea ho bata ka mokhoa o hlollang, ea hlahisa masala a fokolang haholo.Ka hona, Ferro silicon barium inoculant e sebetsa ho feta inoculant e nang le calcium feela, ka papatso

  • Nodulizer(ReMgSiFe)

    Nodulizer(ReMgSiFe)

    Nodulizer ke ntho e lemalloang e ka khothaletsang ho etsoa ha spheroidal graphite ho tsoa likotong tsa graphite ts'ebetsong ea tlhahiso.E ka matlafatsa li-graphite tsa spheroidal le ho eketsa palo ea li-graphite tse spheroidal e le hore thepa ea bona ea mechine e ntlafatsoe.Ka lebaka leo, ductility le toughnes

  • Strontium-Silicon(SrSi)

    Strontium-Silicon(SrSi)

    Ferro silicon strontium nucleating agent ke mofuta oa alloy e thehiloeng ho FeSi e nang le palo e itseng ea barium le calcium, e ka fokotsang ho bata haholo, ea hlahisa masala a fokolang haholo.Ka hona, Ferro silicon barium inoculant e sebetsa ho feta inoculant e nang le calc feela

  • Calcium-Silicon(CaSi)

    Calcium-Silicon(CaSi)

    Silicon Calcium Deoxidizer e entsoe ka likarolo tsa silicon, calcium le iron, ke motsoako o loketseng oa deoxidizer, desulfurization agent.E sebelisoa haholo ka tšepe ea boleng bo phahameng, tšepe e tlaase ea carbon, tlhahiso ea tšepe e sa hloekang le alloy base ea nickel, alloy ea titanium le lihlahisoa tse ling tse khethehileng tsa alloy.

  • Magnesium-Silicon (MgSi)

    Magnesium-Silicon (MgSi)

    Ferro silicon magnesium Nodulizer ke motsoako o kopanyang oa lefatše le sa tloaelehang, magnesium, silicon le calcium.Ferro silicon magnesium nodulizer ke nodulizer e ntle haholo e nang le phello e matla ea deoxidation le desulfurization.Ferrosilicon, Ce+La mish metal kapa rare earth ferrosilicon le magnesium li

  • FerroManganese

    FerroManganese

    Ferromanganese ke mofuta oa ferroalloy o entsoeng ka tšepe le manganese.e entsoe ka ho futhumatsa motsoako oa oxides MnO2 le Fe2O3, ka carbon, hangata e le mashala le coke, ebang ke sebōpi sa mollo kapa tsamaiso ea mofuta oa sebōpi sa motlakase sa arc, se bitsoang sebopi sa arc se kentsoeng ka metsing.

  • FerroChrome

    FerroChrome

    Ferrochrome (FeCr) ke motsoako oa chromium le tšepe e nang le pakeng tsa 50% le 70% ea chromium. Ho feta 80% ea ferrochrome ea lefats'e e sebelisoa tlhahisong ea tšepe e sa hloekang.Ho ea ka carbon content, e ka aroloa ka: High carbon ferrochrome/HCFeCr(C:4% -8%),Medium carbon ferrochrome/MCFeCr(C:1% -4%),Low carbon ferrochrome/LCFeCr(C:0.25) % -0.5%),Micro carbon ferrochrome/MCFeCr:(C:0.03-0.15%).Chaena bakeng sa keketseho ea karolo ea tlhahiso ea lefats'e ea ferrochrome.

  • Ferro Molybdenum

    Ferro Molybdenum

    Ferromolybdenum ke ferroalloy e entsoeng ka molybdenum le tšepe, eo hangata e nang le molybdenum 50 ~ 60%, e sebelisoang e le motsoako oa motsoako ha ho etsoa tšepe. kristale e ntle

  • Stainless Steel Cut Wire Shot

    Stainless Steel Cut Wire Shot

    Mohala oa terata o sehiloeng ka tšepe e sa hloekang ke terata ea rona e khethehileng. E entsoe ka SUS200, 300, 400 letoto la terata ea tšepe e sa hloekang e khaotsoeng ka likarolo.Stainless steel cut wire shot e ntse e sebelisoa palo e ntseng e eketseha ea lits'ebetso tsa bohlokoa moo tšilafalo ea tšepe e phatlohang tšepe e sa hloekang, titanium.

  • Forged Stainless Steel Shot

    Thunya ea tšepe e sa hloekang e entsoeng

    Thunya ea tšepe e sa hloekang ea Forged e entsoe ka SUS200, 300, 400 letoto la terata ea tšepe e sa hloekang, 'me e entsoe ka libolo tse fapaneng.

  • High Carbon Rounded Steel Shot

    Ho thunngoa ha tšepe e phahameng ea Carbon

    Chelete e phahameng ea carbon steel, e entsoeng ka tšepe e khethehileng, e thata le e halefileng, e na le k'habone e kholo ho feta 0.85%. decarboniza

  • Low Carbon Rounded Steel Shot

    Sethunya sa tšepe se pota-potiloeng ka Carbon e tlase

    Lits'oants'o tsa tšepe tse tlase tsa khabone li na le khabone e nyane, phosphorus le sebabole ho feta lithunya tse phahameng tsa carbon steel.Ka hona, sebopeho sa ka hare sa micro carbon shots se bonolo haholo.Lits'oants'o tsa tšepe tse tlase tsa khabone li bonolo ha li bapisoa le lithunya tse phahameng tsa carbon steel.

  • Aluminum shot/cut wire shot

    Aluminium shot/cut wire shot

    Aluminium cut-wire shot (Aluminium Shot) e fumaneha ka lihlopha tse tsoakiloeng tsa aluminium (4043, 5053) hammoho le limaraka tsa alloy tse kang mofuta oa 5356. Limaraka tsa rona tse tsoakiloeng li fana ka mefuta e bohareng ea B (Hoo e ka bang 40) Rockwell hardness ha mofuta oa 5356 o tla hlahisa Rockwell e phahameng. B boima ba 50 ho isa ho 70.

  • Red Copper shot/copper cut wire shot

    Koporo e khubelu e thunngoe ka mohala

    1. E tlosa flash ho fihla ho 0.20 ″ ho tloha ho die castings ntle le ho senya bokaholimo
    E fokotsa ho senyeha ha lisebelisoa tsa ho phatloha
    E tlosa pente le liaparo tse ling ntle le ho senya bokaholimo ba karolo
    Filimi e tšesaane ea zinki e kenngoa likarolong tsa tšepe nakong ea potoloho e fanang ka tšireletso ea nako e khutšoanyane ea mafome

  • Zinc shot/Zinc cut wire shot

    Zinc shot/Zinc cut terata shot

    Re fana ka mefuta e mengata ea boleng ba Zinc Cut Wire Shots.E fumaneha ka litefiso tse tšoanelehang, lihlahisoa tsa rona li fokotsa ho senyeha ha thepa ea ho phatloha.Lithunya tsena tsa terata tse sehiloeng tsa Zinc li bonolo ho feta terata e sehiloeng ea tšepe e sa hloekang kapa lihlahisoa tse entsoeng ka tšepe.Zinc cut wire shot e fumaneha ka boholo bo fapaneng.

  • Grinding Steel Shot

    Ho Thunya Tšepe

    Alloy grinding steel shot e ipapisitse le sets'oants'o sa tšepe e phahameng ea khabone, sethunya sa tšepe ea khabone e tlase, le lithunya tsa tšepe tse tlase tsa vanadium, ho nahanoa ka bofokoli bo bolaeang ba lihlahisoa tse kaholimo: lesoba la moea, mapetsong, phapang ea boima, nts'etsopele ea lihlahisoa tse ncha theknoloji ea forging, e ka khetha lisebelisoa tse fapaneng

  • Forging steel  ball

    Ho theha bolo ea tšepe

    Forging steel rolling ball e entsoe ka tšepe e chitja e le thepa e tala, e sebetsoang ka 'mele ke theknoloji e ncha ea ho roala le ho qhekella ebe e etsoa ke theknoloji e khethehileng ea kalafo ea mocheso.
    Ka mor'a lilemo tsa phihlelo ea ho bokella le liteko tse phetoang,

  • Cut Wire Shot/New Wire

    Seha Wire Shot / Mohala o Mocha

    Cut Wire Shot e entsoe ka terata ea boleng bo holimo e sehiloeng ho isa bolelele bo lekanang le bophara ba eona.Mohala o sebelisoang ho hlahisa Cut Wire Shot o ka etsoa ka tšepe ea Carbon, Stainless Steel, Aluminium, Zinc, Nickel Alloy, Copper kapa lisebelisoa tse ling tsa tšepe.E ntse e na le likhutlo tse bohale ho tloha ho seha

  • Cut Wire Shot/Used Wire

    Seha Wire Shot / Sesebediswa Wire

    Sehlahisoa sa tšepe se khaotsoeng hape ke mofuta oa sehlahisoa se sebelisang thepa e tsosolositsoeng, theko ea thepa ea sona e tlase, 'me ho thata ho hlahisa lihlahisoa tse nepahetseng haholo, sehlahisoa sa mofuta ona se ka sebelisoa feela ho hloekisa bokaholimo. libaka.Bakeng sa bareki ba se nang khethehileng

  • High Carbon Angular Steel Grit

    Khabone e phahameng ea Angular Steel Grit

    High carbon angular steel grit e entsoe ka ho thunngoa ha tšepe e phahameng ea carbon.Lits'oants'o tsa tšepe tse silakantsoeng ho ba sebopeho sa granular grit mme kamora moo li behoa ho hardness tse tharo tse fapaneng (GH, GL le GP) ho fana ka lits'ebetso tse fapaneng.High carbon steel grit e sebelisoa haholo joalo ka media bakeng sa descali

  • Low Carbon Angular Steel Grit

    Nalane e tlase ea Carbon Angular Steel Grit

    Motsoako oa tšepe o tlaase oa carbon angular o etsoa ka tšepe e tlaase ea carbon
    ho thunngoa. Lithunya tsa tšepe tse pshatlehileng ho granular grit.E se nang sekoli ka lebaka la phekolo ea mocheso kaha phekolo e eketsehileng ha e hlokahale.